Resources
Truck Equipment Installation for Racks, Truck Boxes, Transfer Tanks, Van Shelving, Bulkheads and More
Fitment checks before parts arrive, rack and box mounting on the bed rails, transfer tank and van interior details, and the keys, bolts and inserts to look after once the vehicle is back at work.
Truck equipment installation goes smoothly when the parts are matched to the vehicle before anything is fitted, and Nation Wide Ladder handles both, checking fitment and then installing racks, truck boxes, transfer tanks and van equipment ourselves. The work follows the vehicle, from ladder racks and saddle, side and underbody boxes on a pickup to steel transfer tanks, and shelving, bulkheads and roof racks in a cargo van, with a short list of care once the job is done.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Fitment Checks Before Any Truck Equipment Installation
An installation runs into trouble most easily when a box, rack or package does not match the vehicle it arrives for. Truck parts depend on the year, make and model, the cab style and the bed length, and on whether the pickup carries a cap, a service body or a platform body. Van equipment depends on roof height and wheelbase, since Weather Guard and Holman build their packages, bulkheads and roof rack mounts around those two figures.
Some checks are about how pieces share the bed. On an 8 foot bed the gap between System One trusses measures 88 3/8 inches, so an 87 inch crossover box fits, while a 90 inch box calls for extra-length Traks that open the gap to 90 3/8 inches. Weather Guard supplies leveling spacers so a saddle box sits flush with a rack’s mounting feet, and many Holman racks list a mount kit as a required, separate part. Catching those details first keeps the truck equipment installation to a single visit.
Our team checks fitment against the year, make, model, roof height and wheelbase before we quote, so the equipment that arrives is the equipment your vehicle takes.
Truck Rack and Box Installation on the Bed Rails
A good rack installation spreads the load and keeps holes out of the truck. System One starts with the Pick-up Trak, an aluminum base fixed to the inside lip of the bed rail that spreads the weight of rack and cargo along it, and once the Traks are in, the trusses and accessories mount to them rather than to the truck. System One warns that drilling into a truck bed just creates another place for rust to start. Each leg sits on a truss mount with an oblong hole, so it can shift about half an inch in or out during fitting. Our System One truck racks page covers the parts in detail.
Truck boxes follow the rack. A crossover box sits on two 5/16 inch carriage bolts slid into the top slot of each Trak, so the only drilling is through the box itself, and top-side and low-side boxes hang from tool box hangers on Heavy I.T.S. gussets with no legs on the bed floor, which also spares a bed liner. Our Weather Guard truck boxes page lists the saddle, side and underbody styles we fit.
We offer custom powder coating on new System One truck rack purchases, so the rack can be finished in your color before it goes on the truck.
Transfer Tank and Van Equipment Installation Details
A transfer tank is truck equipment with rules of its own. Weather Guard builds its painted steel tanks with integrated mounting tabs and rubber isolation bushings, and interior baffles that cut slosh on the road. They are designed for diesel and other combustible or non-flammable liquids, never gasoline, aviation fuel or propane, and they must not be connected to the truck’s own fuel system. The reinforced 2 inch NPT neck takes most off-the-shelf transfer pumps rated up to 25 GPM. Our Weather Guard transfer tanks page lists the 45 to 90 gallon sizes.
Van installation works from the bulkhead back. Weather Guard treats one bulkhead plus three shelving units, two on the driver side and one on the passenger side, as a sensible starting layout for most trades, and it describes its steel bulkheads as compliant with the FMVSS standards that apply to cargo vans. Holman van shelving packages bundle shelving, a bulkhead partition and trade storage for a named model and wheelbase, so the interior equipment goes in as one matched set.
Our Windham, NH and Worcester, MA showrooms offer free in-person consultations, where you can walk through a tank or van layout with us before the installation is booked.
Care After Truck Equipment Installation, From Keys to Bolts
A few habits keep new equipment working. Register a new Weather Guard truck box so its key code stays on file, because replacement keys are ordered through Simply Keys using that code and the box type. Weather Guard boxes are not fire rated, so plan where fuel and other flammables ride. On a System One truck rack, check bolts, knobs and inserts from time to time, and replace worn Ladder Life or Ladder Glide inserts so ladders keep riding on rubber and plastic rather than bare metal.
Upgrades are simpler when the first truck equipment installation allows for them. System One Standard series racks bought after April 1, 2000 can be converted to take Work Winches by replacing four gussets and four braces, and Work Winches can go onto any I.T.S. rack at purchase or years later. Keeping the part list from the original job makes those later additions quick to quote.
Over 50 years of serving homeowners and contractors means we can still help with parts and upgrades long after the first rack goes on.
Truck Equipment From Several Makers on One Vehicle
Many work trucks mix brands, such as a System One rack over a Weather Guard box with a Holman interior in the company van. Each maker mounts its equipment a little differently, so the combination is worth planning as one vehicle rather than as separate purchases.
Before you settle the mix, you can compare each maker we carry in our ladder and truck equipment brands hub.
Booking Truck Equipment Installation in New England
We don’t just sell, we install, fitting racks, underside, high side, low side and saddle truck boxes, transfer tanks and van equipment from Holman, Weather Guard and System One. Call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts, or send your vehicle details through our quote form, to arrange truck equipment installation for your pickup or van.
Truck Equipment Installation FAQs
What truck equipment installation do you offer?
We install truck racks, underside, high side, low side and saddle truck boxes, transfer tanks and van equipment such as shelving, bulkheads and roof racks.
Does a truck rack installation mean drilling the bed?
System One mounts its racks on a Pick-up Trak fixed to the inside lip of the bed rail, and once the Traks are in, the trusses and accessories mount to them rather than to the truck.
Can a transfer tank connect to my truck fuel system?
No. Weather Guard says its transfer tanks must not be connected to the truck’s own fuel system, and they are designed for diesel, never gasoline, aviation fuel or propane.
What should I check before truck equipment installation?
The year, make, model, cab style and bed length for a pickup, or the roof height and wheelbase for a van, plus any cap, body or existing rack.
What is a typical van equipment installation?
Weather Guard treats one bulkhead plus three shelving units, two on the driver side and one on the passenger side, as a sensible starting layout for most trades.
How do I care for truck equipment after installation?
Register Weather Guard truck boxes to keep the key code on file, and check System One bolts, knobs and inserts from time to time.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.







