Resources

Truck Bed Drawers vs Tool Boxes, Weighing Deck Load, Rail Space, Covers, Slides, Racks and More

Roll-out drawer systems under a working deck set against crossover, side and chest tool boxes, with load ratings, fit by truck, tonneau and cap use, and combined layouts.

Truck bed drawers bring tools out to the tailgate under a deck you can still load, while a tool box keeps tools behind the cab or along the rails, and each one costs a different part of the bed. Nation Wide Ladder helps you weigh a DECKED drawer system against crossover, side and chest tool boxes, plus combinations with roll-out slides, System One StowAway drawers and ladder racks, then installs the layout that suits your work.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

How Truck Bed Drawers Work Beneath a Load-Carrying Deck

A drawer system turns the floor of a pickup into two layers. The DECKED Drawer System puts full-length drawers under a deck that still works as a truck floor, and they roll out to the tailgate so tools come to waist height instead of sitting out of reach at the front of the truck. DECKED rates the deck for 2,000 lb spread evenly and each drawer for 400 lb, built from high-density polyethylene over a steel frame, with side pass-throughs that reach the space beside the wheel wells.

The drawer units are lockable and weather-resistant, so tools stay dry through rain, snow and truck washes and secure when the truck sits overnight. Each truck system is built for one combination of make, model, year and bed length across full-size and midsize trucks. It bolts to the factory tie-down points, which means most full-size trucks need no drilling, while 8 foot beds and certain midsize models call for a handful of small holes. DECKED puts the job at about two hours with hand tools, and the system comes out again if the truck is sold. Spray-in bed liners can stay, but drop-in liners and mats have to come out. For a crew that leaves meters, cordless kits and hand tools in the truck every night, that locked, sorted space is the main draw, since each tool has its own place instead of riding loose.

Our team confirms the make, model, year and bed length of your truck before quoting, so the system that arrives is the one built for that truck.

DECKED

Truck Tool Boxes Next to Bed Drawers for Reach and Rail Space

A tool box solves the same storage problem from a different place. A crossover spans the rails behind the cab and leaves the whole floor open for material, and Weather Guard’s deep 123 saddle holds 15 cubic feet in one lid. Side units run along the rails so tools are reachable from the ground, and a chest sits on the floor against the front wall. DECKED makes its own crossover too, a seamless molded polymer box with a gasketed lid that cannot rust.

The trade-off is where the space goes. Truck bed drawers keep the rails free and the floor flat, so plywood, coolers or a pallet ride on the deck above the tools, but they raise the floor and use the lower part of the bed. A crossover or side unit keeps the floor at its original height and gives the most cubic feet near the cab, but it claims the bed rails, and a crossover cannot sit under a tonneau cover. DECKED notes that most tonneau covers, caps and camper shells stay usable over its system because the deck sits under the rails.

Our showrooms in Windham, NH and Worcester, MA offer free consultations, so you can pull a drawer and lift a box lid before deciding.

Weather Guard Saddle Boxes

Combining Truck Bed Drawers With Slides, Boxes and Racks

The choice is not always one or the other. DECKED notes that many owners mount its CargoGlide slide on top of the Drawer System, so heavy loads roll out over the drawer deck, and payloads on the slide run from 1,000 to 2,200 lb. System One takes another route with StowAway drawers that sit under side tool boxes hung from its rack, riding on aluminum extrusions with nylon guides and keyed alike with its Full Access tool box locks.

A rack has to fit around whichever you pick. A drawer system leaves the rails clear for an over-bed ladder rack or a capped pickup with Holman cap ladder racks on the shell, while a crossover sets where the rack feet can go. On a truck with side units, Weather Guard lo-side models at 13.25 inches tall leave more room beside a rack upright than a hi-side.

We install truck equipment of every kind, so a drawer system, truck boxes and the rack above them can go on in one planned visit rather than three.

System One Full Access Tool Boxes

Truck Drawers in a Complete Pickup Layout

Storage inside a truck decides what can ride above it, so a drawer system, boxes, a slide and a ladder rack are easiest to plan as one layout from the start rather than added one at a time.

For a side-by-side look at each storage, rack and ladder maker we carry, browse our ladder and truck equipment brands hub.

Truck Bed Drawers or a Tool Box, Matched to Your Pickup

Whether a drawer system, a crossover or a mix of both suits your work depends on the cover, the rack and what rides on the floor, and Nation Wide Ladder quotes truck bed drawers and tool boxes for your exact truck, delivered on our own trucks across New England.

Truck Bed Drawers FAQs

How much weight can truck bed drawers carry?

DECKED rates its deck for 2,000 lb spread evenly and each drawer for 400 lb.

Do truck bed drawers work with a tonneau cover or cap?

DECKED says most tonneau covers, caps and camper shells stay usable because its deck sits under the bed rails.

Do truck bed drawers need drilling?

The DECKED system bolts to the factory tie-down points, so most full-size trucks need no drilling. Trucks with 8 foot beds and certain midsize models need a few small holes.

Is a truck bed drawer system better than a tool box?

Neither is better for every truck. A drawer system keeps the rails clear and the floor flat for loading on top, while a crossover or side box keeps the original floor height and gives more volume near the cab.

Can I add a slide over truck bed drawers on my truck?

Yes. DECKED notes that many owners mount its CargoGlide slide on top of the Drawer System.

Do truck liners have to come out for truck bed drawers?

Spray-in liners can stay, but DECKED says drop-in liners and mats need to come out.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder