Truck Tool Boxes
High Side Tool Boxes in Topsider, Full Access and HD Aluminum Designs With Upswing or Drop Down Doors and More
Weather Guard, K&W and System One high side models compared by height, length, door style, aluminum gauge, interior layout and how each one mounts along the rail.
Buying high side tool boxes makes sense when a crew wants the most storage it can reach from the ground, and Nation Wide Ladder measures the rails, quotes the length that suits the bed and installs the pair. We list the Weather Guard high side aluminum box from 46 to 96 inches, the K&W Standard 100 Series and HD 150 Series topsiders, and the System One Full Access Series, with drop down, upswing and full access lids.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Who High Side Tool Boxes Suit and What They Ask of the Bed
High side tool storage suits the trades that work from the edge of the truck all day. A plumber pulling fittings at every stop, an electrician reaching for a meter or an HVAC technician carrying parts for several calls can reach a high side compartment from the ground, and two units along both rails turn the bed into an organized parts room with an aisle down the middle. Because each unit rises well above the rail, a high side tool box holds more per foot of bed than a lower rail-mounted design, and lengths up to 96 inches suit an 8 foot bed.
That height carries costs worth weighing. Material can no longer slide across the rails over the boxes, the view over the bed shrinks, and the base on each rail takes width from the floor, so pallets or sheet goods must fit the aisle between the two. A truck that hauls wide loads or runs a low ladder rack may suit low side tool boxes better, while a service truck that rarely carries anything wider than that aisle gets the most from high side tool boxes.
Our team asks what you carry and what crosses the rails before helping you decide whether high side storage suits the truck.
Weather Guard and K&W High Side Tool Box Heights, Lengths and Doors
The Weather Guard high side aluminum box is the slimmer family at 16 inches high and 13 inches wide. Lengths run 46, 64, 72, 90 and 96 inches across models 346, 364, 372, 390 and 396, with the last two digits of each model number giving its length, and Weather Guard offers high capacity sizes for crews that need more volume. Each one is finished in ARMOR-TUF powder coat, bright or black, with a limited lifetime warranty.
K&W builds its high side tool box models taller. The K&W Standard 100 Series measures 20 inches high by 15 wide, and you choose a drop down or upswing door across four lengths from 68 to 96 inches. The HD 150 Series rises to 20.5 inches high, its sides tapering from 15 inches at the base to 11 at the top, and it moves up to .080 gauge aluminum, adding an upswing door and a center shelf running its full length, offered in the matching 68 to 96 inch sizes. Comparing the two makers comes down to height against width, since the narrower Weather Guard leaves more bed floor while the taller K&W units hold more above the rail.
Long high side units are awkward to ship, so our own delivery trucks bring a matched pair to your shop anywhere in New England on the same run.
System One Full Access High Side Storage That Opens Completely
The System One Full Access Series answers the usual complaint about rail tool storage, which is digging through a narrow door. Lid and front swing up as one piece on stainless steel pivot pins, which System One describes as 100 percent access to the interior, and gas springs hold the lid open. The body is .100 gauge aluminum diamond tread plate welded to .188 inch cast aluminum ends, available in eight sizes between 48 and 96 inches, and the interior can be left open or fitted with dividers, shelves, a mix of both, or a mix with parts bins.
Mounting is where a Full Access tool box differs most from other high side units. Fitted to a System One rack that uses Heavy I.T.S. gussets, the box bolts into the rack's Pick-up Trak and its inner edge hangs from the gusset, so no holes go into the truck and the floor stays clear for plywood. The 87 inch length is the one that fits between rack trusses on an 8 foot bed, and trucks with other racks or none use aluminum legs spaced more than 48 inches apart for sheet goods. Our System One page covers the racks they pair with.
We install racks as well as truck storage, so a Full Access tool box and the rack it hangs from can go on in one visit.
High Side Rail Storage Inside a Complete Pickup Layout
A pair of high side units fixes the width of everything else in the bed. A ladder rack has to clear their height, a crossover behind the cab has to meet them at the front, and the aisle between them sets how wide a load can lie on the floor. Our truck tool boxes overview lays out every mounting style together, while Weather Guard's box lineup and K&W's truck box series are covered maker by maker.
To see how other manufacturers handle rail storage and racks, browse the makers in our brands hub for ladders and truck gear.
High Side Tool Boxes Sized to Your Rails and Trade
Send us your bed length and a list of what rides along the rails, and we will quote high side tool boxes from Weather Guard, K&W or System One, by phone at 603-434-6911 or 508-754-3030. Nation Wide Ladder has worked with contractors for more than 50 years from showrooms in Windham, New Hampshire and Worcester, Massachusetts, and our trucks deliver across Connecticut, Rhode Island, Vermont and Maine as well.
High Side Tool Boxes FAQs
Which high side tool boxes hold the most?
Of the models we list, the K&W HD 150 Series stands tallest at 20.5 inches high, and Weather Guard offers high capacity sizes of its high side aluminum box.
Should I choose the K&W Standard 100 or the HD 150 high side box?
Pick the HD 150 for heavy daily loads, since it uses thicker .080 gauge aluminum with an upswing door and a center shelf along its length. The Standard 100 lets you choose a drop down or upswing door.
What lengths do high side tool boxes come in?
Weather Guard lists 46, 64, 72, 90 and 96 inches, K&W lists 68, 72, 87 and 96 inches, and System One makes the Full Access Series from 48 to 96 inches.
Do high side tool boxes need holes drilled in the truck?
Most bolt to the rails, but a Full Access box hung from the Heavy I.T.S. gussets of a System One rack needs no holes in the truck.
Is high side or low side storage right for my truck?
Choose a high side tool box when you want the most volume along the rails and rarely slide loads across them. Low side units keep the view and the rail line lower.
Do you install high side tool boxes?
Yes. We install high side, low side, saddle and underside boxes, plus racks and transfer tanks.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.









