Truck Tool Boxes
Chest Tool Boxes in Extra Wide, All-Purpose and Angled Wheel Well Designs With Notched Lids and More
K&W 500 and 550 Series and Weather Guard All-Purpose and 644, 674 and 654 chests, compared by width, base, length, lid clearance and fit around wheel wells and fifth-wheel hitches.
Choosing chest tool boxes makes sense when the rails are needed for a rack or a cover, and Nation Wide Ladder measures the bed floor, quotes the chest that clears the wheel wells and installs it. We list the extra wide K&W 500 Series, the Weather Guard All-Purpose Chest from the Defender Series, and the angled wheel well models for fifth wheel trucks, Weather Guard 644, 674 and 654 and the K&W 550 Series.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Chest Tool Boxes on the Bed Floor and Why the Rails Stay Free
A chest rests on the floor of the bed, pushed up to the bulkhead rather than perched on the rails, so both rails stay free for a ladder rack, a headache rack or the seal of a tonneau cover. That makes chest tool storage the usual answer on trucks where the rails are already spoken for, and on pickups towing a fifth wheel, where an angled chest leaves the hitch clear. All the chest boxes we list have a notched rear edge on the lid, giving it room to open beside the cab or a headache rack.
The cost is floor length at the front of the bed, and the fit is decided by two measurements. Weather Guard singles out the distance between the bulkhead and the leading edge of the wheel well as the key one for a chest tool box, since the base has to fit inside it to rest flat. The second is the floor width between the wheel wells, which sets the longest tool box the bed can take. Lengths run from 36 to 60 inches across the chest tool box range we carry, so most beds have a size that fits.
Our team measures the bulkhead gap and the wheel well spacing on your truck before we suggest a tool box, so the model you order sits flat on the floor.
Flat Floor Chest Tool Boxes From K&W and the Weather Guard Defender Series
Measuring 24 inches across and 20 inches tall, the K&W 500 Series chest is the extra wide choice, built for storage room on the bed floor. K&W makes it in 36, 48 or 60 inch lengths with a bright or black finish. A wide chest suits a pickup used mainly for tools, where giving up some floor depth at the front costs little.
The Weather Guard All-Purpose Chest, model 300401 in the Defender Series, is a single 50 inch length at 19.5 inches high and 17.5 inches wide, in bright or black. Weather Guard welds the Defender family from four pieces, stiffens each lid with a C-channel, braces the front panel and closes it on two dual-stage rotary latches with looped strikers, then lists a 7 year warranty. Comparing the two chest tool boxes side by side, the K&W holds more in its 24 inch width and offers three lengths, while the narrower Weather Guard leaves more of the floor behind it open for material.
You can lift both lids and compare the widths in person at our Windham, NH or Worcester, MA showroom, where consultations and estimates are free.
Angled Chest Tool Boxes That Clear Wheel Wells and Trailer Hitches
Fifth wheel trucks need a chest that narrows at the bottom so it can sit between the wheel wells and leave the hitch clear. Weather Guard shapes models 644, 674 and 654 for exactly that, standing 19.25 inches high and 20.25 inches wide at the top on a 17 inch base, in 36, 46 and 58 inch lengths. They share the notched lid, come powder coated in bright or black ARMOR-TUF and are backed by Weather Guard's limited lifetime warranty.
The K&W 550 Series chest follows the same idea at 18.25 inches high and 20.5 inches wide, tapering to a 15 inch base, offered 36, 48 or 60 inches long in either finish. The two angled chest tool boxes differ mainly at the floor, where the narrower 15 inch K&W base clears tighter wheel wells and the Weather Guard gains height and top width. Before settling on a length, check how far the hitch sits from the bulkhead, because that distance limits how far back an angled chest can extend.
We don't just sell, we install, so an angled chest goes into your bed squared up and clear of the hitch and the wheel wells.
Chest Tool Storage Beside Racks, Covers and Crossovers
A chest works best as part of a planned bed. A ladder rack overhead uses the free rails, a tonneau cover can seal along them, and some trucks set a crossover over a chest for extra space, which our crossover tool boxes cover in detail. Every mounting style sits side by side in our truck tool boxes overview, and the makers' own ranges are on our Weather Guard boxes and K&W boxes pages.
For the rack or cover, you can compare every maker we carry in our ladder and truck gear brands hub.
Chest Tool Boxes Quoted for Your Bed and Hitch
Send us your bed measurements and hitch setup, or call 603-434-6911 or 508-754-3030, and Nation Wide Ladder will quote the chest tool boxes that fit, from the flat K&W 500 and Weather Guard Defender chest to the angled Weather Guard and K&W wheel well models. Our own trucks deliver door to door across Massachusetts, New Hampshire, Maine, Vermont, Connecticut and Rhode Island, with shipping anywhere in the US.
Chest Tool Boxes FAQs
Which chest tool boxes fit a fifth wheel truck?
The angled models, Weather Guard 644, 674 and 654 and the K&W 550 Series, narrow at the base to sit between the wheel wells and leave the hitch clear.
What is the widest chest tool box you list?
The K&W 500 Series measures 24 inches across, stands 20 inches tall and comes 36, 48 or 60 inches long.
Why do chest tool boxes have a notched back lid?
The notch gives the lid clearance to swing up beside the cab or a headache rack, and every chest we list has one.
How do I measure for a chest tool box?
Take the distance from the bulkhead to the leading edge of each wheel well, which the base must fit within, and the floor width between the wells, which caps the length.
What warranty comes with a Weather Guard chest?
Models 644, 674 and 654 are covered by Weather Guard's limited lifetime warranty, while the Defender Series All-Purpose Chest is listed at 7 years.
Can a chest tool box work with a ladder rack?
Yes. A chest leaves both rails free, so a ladder rack or a tonneau cover can mount on them.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.









