K&W Manufacturing range

K&W Truck Boxes, From 600 Series Crossovers to Topsiders, Side Mount Boxes, Wheel Well Chests and More

Crossover, high side, lo-side and chest series compared by dimensions, base width, lengths, doors and lids, with standard and HD versions in bright or black.

A box that fights the bed rails, wheel wells or ladder rack wastes the space it was meant to add, and Nation Wide Ladder measures your truck so the K&W truck boxes we quote fit it and installs them. We list four types, the 600 Series crossover in standard and low profile, the Standard 100 and HD 150 Series topsiders, the 300 and HD 350 Series side mount boxes, and the 500 and 550 Series chest boxes.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Four Types of K&W Truck Boxes and the Work Each One Suits

Each K&W truck box type answers a different question about the bed. A crossover box spans the truck rails behind the cab and suits a contractor who wants locked storage but still needs the full floor for material. A topsider, which the store files as a high side box, runs along one rail with storage that opens toward the bed, a good fit for a plumber or electrician reaching for parts from the side. A K&W side mount box, the lo-side option, sits lower along the rail, leaving more of the view and the bed open.

A chest box sits on the bed floor against the front wall and leaves both rails free, which suits a truck with a ladder rack or a tonneau cover. The cost is some floor length. Many trucks combine types, such as a pair of side mount models with a ladder rack, or a crossover over a chest for extra space. Because K&W builds every type in bright or black, a combination can still look like one setup.

Each K&W series we list also comes in more than one length, so the choice of type comes first and the length follows the bed.

We install high side and low side boxes and other equipment, so our team can mount K&W truck boxes alongside your rack in one visit.

K&W Manufacturing 300 Series Side Mount Box

K&W Truck Crossover Boxes in the 600 Series, Standard and Low Profile

The 600 Series comes in two versions with three models each. The K&W 600 Series Standard crossover is listed as the CKWTB600-FL at 70 inches long, the CKWTB670-FL at 71 inches and the CKWTB680-FL at 68 inches, each 20 inches wide and 14.5 inches high. The 600 Series Low Profile models, CKWLP600-FL, CKWLP670-FL and CKWLP680-FL, measure 71.5, 72.5 and 69.5 inches long at the same 20 inch width and listed 14.5 inch height.

K&W offers different lengths because pickup beds differ in rail width, and a crossover has to land on both rails with its ends supported. That is why the model number matters more than the version name. When the bed calls for more room, K&W also offers a 700 Series Wide and Deep crossover, listed at 22 by 20 inches for the standard style and 21.75 by 19.75 inches for the low profile style. Both versions come in bright or black, with other sizes available.

Our team checks the fitment and spec for your truck, measuring rail to rail before we choose between the 600 and 700 Series K&W truck boxes.

K&W Manufacturing 600 Series Low Profile

Topsider and Side Mount K&W Truck Boxes Along the Bed Rails

The K&W Standard 100 Series topsider is 20 inches high and 15 inches wide, with drop down and upswing door options, in 68, 72, 87 and 96 inch lengths. The K&W HD 150 Series topsider stands 20.5 inches high with a 15 inch base and an 11 inch top, built of .080 gauge aluminum with an upswing door and a full length center shelf, in the same four lengths.

Side mount models sit lower. The 300 Series measures 12 inches high, 8 inches at the base and 12 inches overall, in 48, 60 and 72 inch lengths. The HD 350 Series grows to 17 inches high, an 11.5 inch base and 16.5 inches overall, in 48, 65 and 90 inch lengths, with a full access lid, a removable parts tray and .080 gauge aluminum. Base width is what the truck rail carries, so the slimmer 300 suits midsize beds while the HD 350 trades bed width for capacity.

Our own trucks deliver door to door across New England, so a pair of 96 inch topsiders arrives on site without a freight terminal pickup.

K&W Manufacturing HD 150 Series Topsider

K&W Truck Boxes and the Rest of the Bed

Rails carry more than K&W storage on a work pickup. Ladder racks clamp to them, tonneau covers seal to them and bed slides need the floor between them, so a box chosen alone can block the next upgrade. Laying out the whole bed first keeps every piece compatible.

To line up racks and bed equipment from other makers against that layout, open our ladder and truck equipment brands hub.

K&W Manufacturing 500 Series Chest Box

K&W Truck Chest Boxes, the Extra Wide 500 and the Angled 550

The K&W 500 Series chest box is the extra wide option at 20 inches high and 24 inches wide, made for maximum storage on the truck bed floor. The 550 Series is shaped differently. It stands 18.25 inches high and 20.5 inches wide at the top but narrows to a 15 inch base, an angled design K&W built to fit around wheel wells and fifth wheel trailer configurations. Both chests come in 36, 48 and 60 inch lengths and in bright or black.

Both share a notched back lid for clearance, so the lid can swing open close to the cab or a headache rack. Choosing between them comes down to the bed. A truck that tows a fifth wheel needs the hitch area clear and benefits from the angled 550, while a pickup used for tools alone can take the full width of the K&W 500. Measure the floor between the wheel wells and the distance to the hitch before choosing a length.

Call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts with your bed measurements, and we will quote the chest that clears them.

K&W Manufacturing 550 Series Chest Box

Order K&W Truck Boxes With Installation

We match K&W truck boxes to your rails, bed floor and towing setup, then quote and install them in bright or black. Browse our truck box store category, see the K&W tongue and specialty boxes, or return to the full K&W tool boxes range.

K&W Truck Boxes FAQs

Which K&W truck boxes fit a pickup that tows a fifth wheel?

The 550 Series chest box has an angled design made to fit wheel well and fifth wheel trailer configurations.

What lengths do K&W truck crossover boxes come in?

The 600 Series Standard runs 68, 70 and 71 inches long and the Low Profile 69.5, 71.5 and 72.5 inches, depending on model.

What is the difference between the K&W 100 and HD 150 topsiders?

The HD 150 adds .080 gauge aluminum, an upswing door and a full length center shelf, and tapers from a 15 inch base to an 11 inch top.

Which K&W side mount truck box holds more?

The HD 350 Series is 17 inches high with a 16.5 inch overall width, compared with 12 by 12 inches for the 300 Series, and adds a removable parts tray.

Are K&W truck boxes available in black?

Yes. Every series on our K&W truck boxes listing comes in bright or black.

Need help choosing the right K&W Manufacturing equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder