Truck Tool Boxes

Transfer Tanks in L-Shaped, Column and Rectangular Steel Designs, Aluminum Models, Pump-Ready Necks and More

Weather Guard painted steel and Aluminum Tank Industries models compared by shape, capacity, approved liquids, the federal non-bulk threshold, venting, pumps, mounting and daily inspection.

Transfer tanks carry fuel to machines on site instead of taking machines to the pump, and the challenge is pairing the right shape and capacity with the truck, the pump and the rules for the liquid inside, which Nation Wide Ladder works through before quoting and installing each one. We compare Weather Guard's L-shaped, column and rectangular painted steel transfer models with the Aluminum Tank Industries transfer line we list, then cover approved liquids, mounting, pumps and inspection.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Diesel, Approved Liquids and Federal Thresholds for Transfer Tanks

Loggers, farmers, oil field crews and excavation contractors use a truck-mounted transfer tank to refuel generators, skid steers and compressors where the work is. Weather Guard designs its current transfer line for combustible liquids such as diesel and for non-flammable liquids, and states that it is not certified for flammable liquids such as gasoline, aviation fuel or propane. Weather Guard also separates a transfer tank, which dispenses into equipment, from an auxiliary fuel tank, which feeds the engine, and says its tanks must not be connected to the truck’s factory fuel system.

Federal hazardous materials rules draw a line at size. Under 49 CFR 171.8, a non-bulk packaging for a liquid has a maximum capacity of 450 L (119 gallons) or less, and 49 CFR 173.150(f)(2) says the requirements of that subchapter do not apply to a material classed as a combustible liquid in a non-bulk packaging unless it is a hazardous substance, a hazardous waste or a marine pollutant. Weather Guard adds that the operator decides which rules apply to the liquid, quantity, vehicle and route, and that state and local fire, environmental and transport rules may add obligations.

With more than 50 years of serving contractors, we talk through what your machines burn and how far the truck travels before suggesting a transfer setup.

Aluminum Tank Industries Models TTR51, TTL80, TTL95, TTL95CB

L-Shaped, Column and Rectangular Transfer Tanks From Weather Guard and ATI

Weather Guard sorts its redesigned steel transfer line by shape. An L-shaped tank keeps fuel low across the front of the bed and leaves room for a compatible crossbox, saddle or PACK RAT setup, a column tank fits capacity into a narrow footprint where bed space is short, and a rectangular tank carries the most in a traditional layout. Our listing for Weather Guard models 350, 352, 354, 357 and 359 covers 45, 50, 75 and 90 gallon capacities in white or black ARMOR-TUF powder coated steel with a limited lifetime warranty, and Weather Guard’s current specifications place the 350, 352 and 354 in its L-shape series and the 359 in its column series.

For an aluminum alternative we list Aluminum Tank Industries models TTR51, TTL80, TTL95 and TTL95CB, whose mounting tabs extend 1-1/2 inches beyond the tank, a figure to add when checking the fit between the wheel wells. Weather Guard advises comparing overall dimensions and installed weight with the bed space and the truck’s payload capacity before choosing, and the liquid itself adds weight once the tank is full, so capacity is a payload decision as much as a refueling one.

Send us the bed length, any box already mounted and the gallons your equipment burns in a day, and our team narrows the transfer shapes to the ones that fit.

Weather Guard Models 350, 352, 354, 357, 359

Mounting, Venting and Pump Limits That Keep Transfer Tanks in Service

Weather Guard builds its tanks with rounded corners that reduce stress on the welds, integrated mounting tabs, rubber isolation bushings against road vibration and interior baffles that cut slosh and add internal strength, and each tank is factory leak tested. Install it only with the specified hardware, confirm that no wiring, brake lines or fuel lines run under a drilling point, and tighten fasteners to the model’s instructions.

Pumps thread onto a reinforced 2 inch NPT neck, and Weather Guard sets 25 GPM as the maximum pump flow rate. The lockable vented cap lets the tank breathe through temperature swings, filling and dispensing, so it should never be blocked, swapped for an unapproved cap or used to pressurize the tank. Before each use, look over the shell, mounts, bushings, cap, fittings, pump and hoses for looseness, corrosion or leaks, keep ignition sources away while dispensing, and take a damaged or leaking tank out of service rather than welding or drilling it.

We install truck boxes and transfer tanks as well as sell them, so the tabs, bushings and bolts go on the way the maker specifies before any diesel goes in.

Transfer Tanks Alongside Saddle and Crossover Storage

Fuel and tools usually share the same bed, so a tank is best chosen with the storage above it. An L-shaped model pairs with compatible saddle boxes, our truck tool boxes overview compares every other mounting style, and the Weather Guard transfer tanks page goes deeper on that maker’s steel line.

If you would like to see tanks and racks from more manufacturers, our truck equipment and ladder brands hub lists them.

Transfer Tanks Sized and Installed for Your Equipment

Nation Wide Ladder quotes and installs transfer tanks matched to your equipment, bed and payload, and our own trucks deliver across New Hampshire, Massachusetts, Connecticut, Rhode Island, Vermont and Maine, with Saturday morning hours at both showrooms for crews who can only stop in at the end of the week.

Transfer Tanks FAQs

Can transfer tanks carry gasoline?

Weather Guard's steel transfer line is designed for diesel and non-flammable liquids and is not certified for gasoline, aviation fuel or propane. Check the documentation for any other model before filling it.

Do diesel transfer tanks need hazmat certification?

Under 49 CFR 171.8 a liquid packaging of 119 gallons or less is non-bulk, and 49 CFR 173.150(f)(2) exempts a combustible liquid in non-bulk packaging unless it is a hazardous substance, hazardous waste or marine pollutant. State and local rules may add more.

Which shapes do transfer tanks come in?

Weather Guard builds L-shaped tanks that pair with a crossbox or saddle, column tanks for a narrow footprint and rectangular tanks for maximum capacity.

What pump suits a steel transfer tank?

Weather Guard tanks take most off-the-shelf fuel pumps on a reinforced 2 inch NPT neck, with a maximum flow rate of 25 GPM.

Is a transfer tank the same as an auxiliary fuel tank?

No. A transfer tank dispenses into equipment, while an auxiliary tank feeds the engine. Weather Guard says its transfer tanks must not be connected to the truck's factory fuel system.

Do you install transfer tanks?

Yes. We install transfer tanks along with truck boxes and racks, and our own trucks deliver across New England.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder