Truck Tool Boxes
Underbody Tool Boxes in Aluminum Diamond Plate, Steel and Heavier Gauges From 24 to 60 Inches and More
Weather Guard aluminum and steel models set beside K&W's standard and .100 gauge HD Professional series, with door openings, latches, frame clearance and the truck bodies each one bolts under.
Underbody tool boxes turn the empty space beneath a flatbed, platform or dump body into locked storage, and the challenge is matching length, material and gauge to the frame gaps on each side, which Nation Wide Ladder handles by measuring, quoting and installing the Weather Guard and K&W models we list. We compare Weather Guard's aluminum diamond plate underbody tool line and its steel option with the K&W Underbody Series and its .100 gauge HD Professional version, from 24 to 60 inches.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Weather Guard Underbody Tool Boxes in Aluminum Diamond Plate or Steel
Weather Guard builds its under bed line for heavy-duty trucks, and our Weather Guard underbody tool listing covers models 627, 631, 636, 648 and 660 in 24, 30, 36, 48 and 60 inch lengths, in bright or black ARMOR-TUF powder coat with a limited lifetime warranty. The long end shows what the underbody range offers. Weather Guard lists its 660-0-02 at about 60.13 inches long, 18 inches wide and 18 inches high, holding 11.2 cubic feet in aluminum diamond plate and weighing roughly 103 lb, with a door opening of 13.5 by 55.25 inches.
The underbody door hardware is built for gloved hands and wet weather, and the aluminum door and hinge cut weight and resist corrosion. Stainless steel D-handles pull the door tight to its seal, a rain gutter and full weather seal keep water out, a three-point latching system secures the contents, and QuickClips let the door open anywhere from 90 to 180 degrees without a tool. Weather Guard also offers steel under bed models in gloss black, with bodies listed at 14 or 16 gauge depending on size, and it notes that mounting hardware is not included, which is worth pricing before an underbody tool install is booked.
Send us a list of the underbody lengths you need on each side and we will quote the set, or call 603-434-6911 or 508-754-3030.
K&W Standard and HD Professional Underbody Tool Boxes Compared
K&W lists two underbody series that share one footprint. The K&W Underbody Series box measures 19.5 inches high by 17.5 inches wide in 24, 30, 36, 48 and 60 inch lengths, in bright or black. The HD Professional Series keeps those dimensions and lengths but steps up to .100 gauge aluminum, the heaviest gauge K&W lists across the series we carry, which suits a truck whose underbody tool storage takes chains, binders and heavy hand tools over rough roads every day.
Set next to each other, the two makers solve the same problem with different proportions. A K&W underbody unit stands 19.5 inches tall, while Weather Guard’s 60 inch aluminum model is listed at 18 by 18, so the clear height under your deck and the drop under the frame rail decide which profile fits. Both makers offer the same five lengths, which makes it simple to fill matching gaps on each side of a flatbed, and either maker’s finish options cover bright or black for fleet color matching.
We install underbody boxes along with crossover, rail and saddle storage, so brackets and hardware go on square to the body in one visit.
Frame Space, Body Type and Contents When Choosing Underbody Tool Boxes
Weather Guard lists its under bed boxes for flatbed, platform and dump truck bodies, and the space under each of those decks is broken up by axles, steps, fuel tanks and air tanks. Measure the clear run on each side, from the cab or bulkhead back to the rear axle and from the axle to the end of the body, then note anything that hangs down into that run. Check the drop as well, since a deep unit can sit closer to the road than a step or mud flap.
What rides inside matters as much as the gap. Chains, binders, straps and blocking are heavy and get pulled out from ground level, so a wide door opening and a latch that holds over bumps count for more than total volume. Shovels, bars and other long-handled tools need the 48 or 60 inch lengths, while a 24 inch underbody box can keep straps and ratchets apart from heavier gear. Before drilling any bracket holes, check for wiring, brake lines and fuel lines near the frame rail, the same care Weather Guard asks for when mounting its transfer tanks.
Our own trucks deliver door to door across New England, so a matched pair of 60 inch underbody boxes reaches your yard ready for fitting.
Underbody Tool Storage Next to Deck, Rail and Bed Equipment
Storage under the deck works best when it is planned with everything above it. Our truck tool boxes overview compares every mounting position, our underbody truck boxes resource covers flatbed and service body layouts, and the Weather Guard truck boxes and K&W Manufacturing pages cover each maker’s full range.
For racks and storage from other makers, look through our ladder and truck equipment manufacturers hub.
Underbody Tool Boxes Quoted, Delivered and Installed
Nation Wide Ladder has outfitted contractors’ trucks for over 50 years, and we size, supply and install underbody tool boxes from Weather Guard and K&W for flatbeds and dump bodies across New Hampshire, Massachusetts, Connecticut, Rhode Island, Vermont and Maine, with shipping anywhere in the US.
Underbody Tool Boxes FAQs
Which sizes of underbody tool boxes do you list?
Weather Guard models 627, 631, 636, 648 and 660 and both K&W underbody series come in 24, 30, 36, 48 and 60 inch lengths.
How much does a 60 inch underbody tool box hold?
Weather Guard lists its 660-0-02 aluminum diamond plate model at 11.2 cubic feet, about 60.13 by 18 by 18 inches.
How do K&W's standard and HD Professional underbody tool boxes differ?
Both measure 19.5 inches high by 17.5 inches wide in the same five lengths. The HD Professional Series is built from .100 gauge aluminum for heavier daily use.
Which trucks take underbody tool boxes?
Weather Guard lists its under bed boxes for flatbed, platform and dump truck bodies on heavy-duty trucks. A standard pickup bed has no deck to mount one under.
Does mounting hardware come with an underbody tool box?
Weather Guard notes that mounting hardware is not included with its under bed boxes, so ask us to price it with the box.
Do you install underbody tool boxes?
Yes. We install underside units along with crossover, rail and saddle storage, and our own trucks deliver across New England.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.





