Van Mark Siding Brakes & Accessories

Van Mark TrimCutter and Coil Dispenser, With the 3017 Brake-Mounted Cutter, CD24 Free-Standing Coil Holder and More

How the 3017 cutter rides the AccuTrack rails and what its knives cut, how the CD24 holds and feeds trim coil, and how the pair work together to cut stock to length at the brake.

Cutting trim coil with a utility knife leaves rough edges, and a roll left on the ground unravels or catches the wind, so the Van Mark TrimCutter and Coil Dispenser solve both at the brake, supplied across New England by Nation Wide Ladder. We list the 3017 TrimCutter, which runs on a brake's AccuTrack rails with case-hardened knives, and the CD24 Coil Dispenser, a free-standing holder with non-marring rollers that feeds coil into the brake.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Why Crews Pair the Van Mark TrimCutter and Coil Dispenser

Most trim starts as a roll of coil stock and ends as a bent piece on the house. Between those steps it has to be unrolled, cut to width or length and fed into the brake. Done by hand, the stock gets kinked and scratched on the ground, and knife cuts leave jagged edges that look poor and cut hands.

The two Van Mark tools take over those steps. The CD24 Coil Dispenser holds the roll off the ground and lets material feed out straight. The 3017 TrimCutter rides along the brake and slices the clamped stock cleanly, so the TrimCutter replaces the utility knife entirely. Van Mark says the dispenser works with the TrimCutter, so stock can be pulled from the CD24, clamped in the brake and cut to length without being laid down.

For siding and trim crews working from a van or truck at the curb, that keeps the cutting station compact and the coil in good condition.

Our team will confirm which Van Mark brake you run and whether the TrimCutter suits its rails before you order.

Van Mark CD24 – Coil Dispenser

The Van Mark TrimCutter 3017, Knives and AccuTrack Rails

The Van Mark 3017 TrimCutter runs on the AccuTrack system built into the Power Lock bar of current cam-locking brakes. Four independent tracking wheels keep it aligned and close to the brake, which Van Mark says reduces slip-offs and wobble, and a low-profile handle directs pressure down into the brake so the TrimCutter does not jump the track.

The knives are case-hardened tool steel. Van Mark says they handle anything the brake itself can bend, up to 24 gauge painted Grade D steel, and are designed to last through thousands of feet while leaving a factory-smooth edge without sharp points, so finished trim usually needs no filing before it goes up.

The TrimCutter fits current cam-locking Van Mark brakes, and a single TrimCutter can move between brakes of different lengths on the same crew. For older models, Van Mark asks owners to call and confirm the fit first.

Free in-person consultations at our Windham NH and Worcester MA showrooms let you see the TrimCutter on a brake and check it against your own.

Van Mark 3017 – TrimCutter

The Van Mark Coil Dispenser CD24, Rollers and Setup

The Van Mark CD24 Coil Dispenser is free standing rather than attached to the brake, which Van Mark says makes it easier to use and suitable for any brake. The roll rests on two non-marring rollers and is held by a quick-release tension roller, so it stays rolled tight while material is drawn off and the finish is not scratched on the way out.

Van Mark says a roll on the CD24 is protected from wind damage and from unraveling, which matters on an exposed job site. The CD24 sets up quickly and feeds material straight into most brakes, saw tables and slitters, and it works with the QuickScore as well as the TrimCutter for cutting stock down to length.

Both tools carry a one-year limited warranty from Van Mark. Because the CD24 stands apart from the brake, a crew running several brakes can move it between them as the job changes.

Send us the brake models on your trucks and we will quote a TrimCutter and Coil Dispenser for each, or call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts.

Using and Caring for the Van Mark TrimCutter and Coil Dispenser

Set the CD24 square to the brake so stock feeds straight into the jaws, and lock the tension roller before pulling stock. Clamp the material, seat the TrimCutter on the AccuTrack rails and run it in a single smooth pass while keeping steady pressure on the handle. Let the TrimCutter knives do the work rather than forcing the tool, and check the edge after the first cut on a new roll of painted stock.

Wipe grit off the rails and TrimCutter tracking wheels so the cutter tracks cleanly, and keep the rollers clean so they do not mark painted coil. Store the TrimCutter in its own spot in the van or truck so the knives are not knocked against other tools. Van Mark builds with common off-the-shelf fasteners, and replacing a lost nut or pull pin with standard hardware keeps the warranty intact.

Take the roll off the CD24 before moving it, so the roll does not shift.

We run regular weekly deliveries to Maine from New Hampshire, so Maine siding crews can get the TrimCutter and Coil Dispenser without a special trip.

The Van Mark TrimCutter and Coil Dispenser in a Trim Station

A brake, cutter and coil holder together make a trim station that sits by the truck or van rack, with ladders and staging on the wall.

Compare the makers behind that whole setup in our ladder and truck equipment brands hub.

Order the Van Mark TrimCutter and Coil Dispenser

Nation Wide Ladder has served siding crews for over 50 years, and we quote the Van Mark TrimCutter and Coil Dispenser to match the brakes you run. See them with other Van Mark siding brakes and accessories and the Van Mark range, or browse our Van Mark store.

Van Mark TrimCutter and Coil Dispenser FAQs

What can the Van Mark TrimCutter cut?

Van Mark says it cuts the same material the brake bends, up to 24 gauge painted Grade D steel, with case-hardened tool steel knives.

Will the Van Mark TrimCutter fit my brake?

It fits current cam-locking Van Mark brakes with AccuTrack rails. Owners of older models should check with Van Mark first.

Does the Van Mark Coil Dispenser attach to the brake?

No. The CD24 is free standing, so it can stand next to most brakes, saw tables or slitters.

How does the Van Mark Coil Dispenser protect trim coil?

The coil sits on two non-marring rollers under a quick-release tension roller, which keeps it rolled tight and out of the wind.

Can the Van Mark TrimCutter and Coil Dispenser be used together?

Yes. Van Mark says the CD24 works with the TrimCutter, so stock can be fed into the brake and the TrimCutter cuts it to length.

Need help choosing the right Van Mark equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder