Van Mark Siding Brakes & Accessories

Van Mark TrimMaster Brakes, the Mark II Pro-Grade Line From TM2-S to TM12-S, With POWERslot Hinges, F-Bar Rails and More

Six pro-grade lengths with a 14 inch throat, the 5/8 inch POWERslot hem for vinyl and fiber cement pockets, 0.032 inch aluminum capacity, weights, stands and tune-up parts.

Tight J-channel pockets for vinyl siding and fiber cement need a smaller hem than a basic brake gives, and the Van Mark TrimMaster is built to form them on site, supplied across New England by Nation Wide Ladder. We list the Mark II TrimMaster in six lengths from the 2 foot TM2-S to the 12 foot 6 inch TM12-S, each with a 14 inch throat, the POWERslot hinge that sets a 5/8 inch hem, the cam lock and an F-Bar with AccuTrack rails.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Why Remodelers Choose the Van Mark TrimMaster

Van Mark calls the TrimMaster its workhorse for remodeling contractors. It handles the same window, door, soffit and fascia work as a basic brake, but its hinge and heavier capacity suit crews who wrap trim around vinyl siding or fiber cement every day, often from a van parked at the curb.

The difference is the POWERslot hinge. Van Mark built it from a hollow core extrusion for strength and gave it a free-motion action that auto-measures a 5/8 inch bend. That smaller hem makes the tight pockets vinyl and fiber cement need, and the free motion keeps pressure on the metal through the whole bend so the operator’s effort goes into the material. Van Mark sums up the choice plainly, if you need bends smaller than 3/4 inch, choose a POWERslot brake such as the TrimMaster.

The TrimMaster goes from simple flashing to an outside corner post without adjusting the brake, and its 14 inch throat covers the typical residential trim piece of about 8 inches.

Our team can look at the siding and trim you install and confirm whether the Van Mark TrimMaster is the right grade before you order.

Van Mark TM series – Mark II TrimMaster®

Van Mark TrimMaster Lengths, Castings and Weights

Van Mark makes the TrimMaster in six lengths, and each step up adds reach, castings and weight.

TM2-S and TM4-S. 2 feet with two castings at 36 pounds, and 4 feet 6 inches with three castings at 67 pounds. Good for short trim and repair pieces that ride easily in a van.

TM6-S and TM8-S. 6 feet 6 inches with three castings at 85 pounds, and 8 feet 6 inches with four castings at 104 pounds, popular sizes for window and door wraps. Measure the van or truck that will carry the brake before choosing a length.

TM10-S and TM12-S. 10 feet 6 inches with five castings at 123 pounds, long enough for a full length trim piece, and 12 feet 6 inches with six castings at 159 pounds plus dual bending and locking handles.

The TrimMaster weighs a few pounds more than the light-duty brake at each length, the cost of its stronger hinge.

You can compare TrimMaster lengths in person at a free consultation in our Windham NH or Worcester MA showroom.

Van Mark TrimMaster Capacity, Cam Lock and F-Bar

Van Mark rates the TrimMaster for 0.032 inch aluminum in 3003-H14, a step up from the 0.027 inch light-duty rating, along with 29 gauge galvanized, painted Grade D and 304L stainless steel, 24 ounce soft copper and 0.032 inch soft zinc. Ratings assume standard metal properties, so call the factory about unusual stock.

The patented cam lock uses an aluminum cam with an ultra high molecular weight polyethylene wedge, and Van Mark says it holds up year after year without constant adjustment. Two castings sit at each clamping station on dual base rails. The clamp bar, which Van Mark calls the F-Bar, carries integrated AccuTrack rails for the TrimCutter, TrimFormer and Multi Gauge, and its Power Lock clamping gives a 150 degree bending radius to ease 180 degree hems.

Van Mark lists the newer castings and pivot arms as 5 percent lighter and 10 percent stronger, and covers the TrimMaster with a one-year limited warranty.

Our own trucks deliver door to door across New England, so a TrimMaster and its stand can reach your shop or job together.

Stands, Tune-Ups and Care for the Van Mark TrimMaster

The TrimMaster ships without a stand. Van Mark lists the USA1EZ, USA1 and UNL1 stands, 3002 folding legs and the 3004 wheel kit for 14 inch throat brakes, and a stand at working height makes long bends far easier on the back.

Wear parts such as vinyl strips, wedges, pull pins and springs eventually need replacing, and Van Mark packages those common wear items by model in tune-up kits, each including a vinyl strip, so have the model and serial number ready when ordering. Keep the clamping faces and wear strips clean so painted coil is not marked, and check the cam lock for even pressure along the bar. Van Mark builds with standard off-the-shelf fasteners, and using standard replacement nuts, bolts and pull pins does not affect the warranty.

Secure the brake in the van or truck so nothing rests on the hinge in transit, and check the hinge through its full travel before the first bend each morning.

Send us a quote request for the brake, stand and tune-up kit, or call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts.

The Van Mark TrimMaster in a Remodeling Crew’s Kit

Trim bending sits between the ladders and staging on the wall and the van or truck rack that brings coil to the job. Planning them together keeps the brake length matched to the rack and the work.

To see the full roster of makers we supply, visit our ladder and truck equipment brands hub.

Order a Van Mark TrimMaster

With over 50 years of supplying contractors, Nation Wide Ladder quotes the Van Mark TrimMaster with the stand, cutter and tune-up kit your crew needs. Read the Mark II TrimMaster listing, compare other Van Mark siding brakes and the Van Mark range, or browse our Van Mark store.

Van Mark TrimMaster FAQs

What is the difference between the Van Mark TrimMaster and the light-duty line?

Mainly the hinge. The TrimMaster uses the POWERslot hinge with a 5/8 inch hem suited to tight pockets, while the Mark I uses a traditional hinge with a 3/4 inch hem.

What lengths does the Van Mark TrimMaster come in?

Six lengths from the 2 foot TM2-S to the 12 foot 6 inch TM12-S.

How thick can the Van Mark TrimMaster bend aluminum?

Van Mark rates it for 0.032 inch aluminum in 3003-H14, plus 29 gauge steel and 24 ounce soft copper.

How do I order tune-up parts for a Van Mark TrimMaster?

Van Mark sells tune-up kits of common wear items, each with a vinyl strip. Have the brake model and serial number ready so the right kit is ordered.

Does the Van Mark TrimMaster come with a stand?

No. The USA1EZ, USA1 and UNL1 stands, 3002 folding legs and 3004 wheel kit are sold separately.

Need help choosing the right Van Mark equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder