Louisville Extension Ladders

Louisville 16 ft Extension Ladders in Fiberglass and Type IA, I and II Aluminum Builds and More

Low eaves, garage roofs and sheds, with Louisville reach and extended-length figures, the FE3216 against three aluminum ratings, closed lengths for vans and the gear that fits a 16 ft ladder.

Louisville 16 ft extension ladders cover the low exterior jobs where a stepladder runs out, such as a single-storey eave, a garage roof or a shed, yet even a short ladder has to suit the climber, the wiring nearby and the vehicle that carries it. Nation Wide Ladder quotes all four Louisville series at this size, the fiberglass FE3216 and the aluminum AE2216, AE3216 and AE4216, and we size each one to the work and the load.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

What a Louisville 16 ft Extension Model Reaches on a Low Roofline

Louisville gives every 16 ft model in the four series we carry the same maximum reach, 15 feet 11 inches, figured for a climber 5 foot 7 inches tall reaching 12 inches overhead. The number that matters for setup is the maximum extended length, which Louisville lists as 13 feet for the 16 ft size, because the two 8 foot sections have to overlap once the fly goes up.

Roof access adds a rule of its own. OSHA wants the side rails to run at least 3 feet past the upper landing, so compare the eave height plus that 3 feet with the Louisville 16 ft figures, never with the size on the label. OSHA also sets the base about one quarter of the working length out from the wall. Where the eave sits higher than a 16 ft ladder allows, the 20 foot size comes next in the same Louisville series, and our 16 ft extension ladders from every brand we carry set Louisville beside Werner at this length.

The 16 foot size is where each of these Louisville series starts, so it suits a buyer who wants the same lock, shoe and rung design as a longer extension ladder already on the truck. Matching a short and a tall model keeps climbing habits consistent when a crew switches between them.

Send us the eave or landing height and our team will check it against the Louisville 16 ft figures before we quote, so the length suits the building.

Louisville FE3200 Series – Type IA Fiberglass Extension Ladder

Fiberglass FE3216 Against Three Aluminum Louisville 16 ft Ratings

The Louisville FE3216 fiberglass extension ladder is rated Type IA for 300 pounds and is the only 16 ft model here that Louisville marks as safe around electricity. OSHA requires nonconductive side rails wherever the climber or the ladder could contact exposed energized equipment, so anyone working near a service drop belongs on it. Louisville lists it at 35 pounds.

The aluminum trio trades that protection for lighter carrying. The Louisville AE2216 keeps the 300 pound Type IA rating on a full I-beam rail at 30 pounds. The AE3216 is Type I for 250 pounds, uses a modified I-beam and weighs 27 pounds. The Louisville AE4216 is Type II for 225 pounds, the lightest duty class in the 16 ft group. Louisville fits the MAXLOCK rung lock and the QuickLatch, which holds the sections together once extended, along with D-shaped serrated rungs. OSHA counts the climber plus every tool against the rating, so add both before choosing between 225 and 300 pounds.

Choosing at 16 foot comes down to two questions, whether anyone could touch live wiring and what the heaviest climber weighs with a full belt. Those answers point to fiberglass or aluminum first and to a rating second, and a crew that needs both often keeps one FE3216 beside a lighter aluminum extension model.

At our Windham NH and Worcester MA showrooms you can lift the FE3216 and an aluminum 16 ft model side by side before settling on a rating.

Louisville AE2200 Series – Type IA Aluminum Extension Ladder

Carrying and Storing a Louisville 16 ft Ladder in a Van or Garage

A short extension ladder earns its keep by traveling easily. Louisville lists the closed length of the FE3216 at 101.5 inches, the AE2216 at 100.875 inches and the AE3216 at 100 inches, so measure the van floor, the rack or the garage wall against those figures before you buy. Louisville lists an 8 foot section length for each, which keeps a 16 ft ladder manageable for one person moving between jobs.

Accessories extend what a 16 ft ladder can do. Louisville pairs the FE3216 with an aluminum ladder stabilizer, the LevelOK stabilizer and leveler, the E34 automatic adjusting leveler, pole grips, a V-shaped Pro Top and Pro-Guards covers, while the aluminum AE3216 lists the stabilizer, LevelOK and the covers. The wider Louisville extension ladder range runs these same series from 16 to 40 feet.

Louisville fits mar-resistant rail end caps across its 16 foot extension models, which protect a garage floor, a painted wall or a van panel as well as the ladder itself when it leans or rides against them.

Some crews keep one of our Louisville 16 ft extension ladders as a second ladder beside a longer one, so the short size handles porch roofs and sheds without pulling the long ladder off the rack.

We install truck and van racks as well as selling them, so a Louisville 16 ft ladder and the rack that carries it can be fitted together.

Louisville AE3200 Series – Type I Aluminum Extension Ladder

Louisville 16 ft Ladders in a Mixed-Brand Kit

A 16 ft extension ladder rarely travels alone. It usually rides with a stepladder for interior work and, on many crews, with ladders and racks from more than one maker, so the choice of lock, shoe and rating tends to follow a standard the whole crew already uses.

If you want to weigh Louisville against those other makers, start with our ladder and truck equipment brands hub.

Louisville AE4200 Series – Type II Aluminum Extension Ladder

Quotes on Louisville 16 ft Extension Ladders

Four ratings, two rail materials and a closed length close to 8 feet make this the easiest size to carry and the simplest to match to a low roofline. Call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts, or send a list, and we will quote Louisville 16 ft extension ladders to suit, with the full Louisville range in our store and our Louisville brand page close at hand.

Louisville 16 Ft Extension Ladders FAQs

How high does a Louisville 16 ft extension ladder reach?

Louisville lists a maximum reach of 15 feet 11 inches for its 16 ft models, based on a 5 foot 7 inch person reaching 12 inches overhead, and a maximum extended length of 13 feet.

Which Louisville 16 ft model is safe near power lines?

The fiberglass FE3216. Louisville marks it as safe around electricity, while the aluminum AE2216, AE3216 and AE4216 are marked as not safe.

What do the Louisville 16 ft extension ladders weigh?

Louisville lists the FE3216 at 35 pounds, the AE2216 at 30 pounds and the AE3216 at 27 pounds.

What duty ratings come in a 16 ft Louisville extension size?

Type IA at 300 pounds on the FE3216 and AE2216, Type I at 250 pounds on the AE3216 and Type II at 225 pounds on the AE4216.

How long is a closed Louisville 16 ft extension ladder?

Louisville lists closed lengths of 101.5 inches for the FE3216, 100.875 inches for the AE2216 and 100 inches for the AE3216.

Need help choosing the right Louisville Ladder equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder