Resources

Job Site Security for Tools, From Steel Job Boxes and Recessed Locks to Armoured Carts, Truck Box Keys and More

Welded steel, three-point latches and stacked hinges on site boxes, locking carts and cabinets, keyed-alike truck boxes and the overnight habits that keep a crew’s tools where it left them.

Good job site security starts with where the tools spend the night, and Nation Wide Ladder helps crews plan it with the Knaack boxes and Weather Guard truck boxes we quote, deliver and install across New England. The protection comes in layers, from welded steel boxes with recessed locks and stacked hinges, to locking carts, cabinets and drawers, to keyed-alike boxes on the truck and the daily habits that close the gaps between them.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Job Site Security Starts With a Box Built to Resist a Pry Bar

A pry bar at the lid or the lock is the obvious attack on a box left on the job, so the box itself is the first layer of job site security. Knaack builds its chests and piano boxes from 16-gauge steel with fully arc-welded seams. Security on the lid centers on the patented Watchman IV lock system, which Knaack fits as standard across its line. On the larger chests and the piano boxes it pairs a three-point latch with a 7-gauge reinforced lock housing set into the box, so a thief has less to pry against, while the compact Model 36 uses a two-point latch.

The back edge gets the same attention. Knaack hangs its lids on a full-length piano hinge that it stacks and welds to resist break-ins, so the hinge side is as hard to attack as the front. The Monster Box 1010 goes further with an integrated recessed lock that Knaack describes as UL-rated and resistant to drilling and weather, under a deep cover lid that leaves no exposed seam at the top edge. Our Knaack job site chests page lists the latch on each model.

We have served contractors for over 50 years, and we can point out the latch, hinge and housing details on each Knaack model before you choose a box for the job site.

Knaack Job Site Chests

Locking Carts, Cabinets and Drawers for Job Site Security

Not every tool on the job sits in a chest. Material on a cart can walk off when the crew steps away, and Knaack pitches the doors on its KAT-01 Armoured Transport at exactly that kind of casual borrowing. The cart adds 16-gauge steel armour and a pair of framed steel doors over the front, with a welded and recessed lock housing and no exposed seams or fasteners, while the open KT-01 suits crews who stay with their cart through the job.

The 119-02 Field Station splits its storage so job site security can follow who needs access, with an upper compartment that locks separately and two lower doors whose dual latch points a single padlock secures. On the STORAGEMASTER 79, the JunkTrunk drawer locks on its own and can be keyed alike with the main box or apart from it, so a foreman can hold the key to the main compartment while the crew uses the drawer. Both are covered on our Knaack field stations and Knaack 69 and 79 piano boxes pages.

Our Windham, NH and Worcester, MA showrooms offer free in-person consultations, where you can try the cart doors, cabinet locks and drawer keys before they go to the job site.

Knaack Field Stations & Transports

Security on the Truck Between Job Sites

Tools are exposed on the road as well as on the job. For security on the road, the current Weather Guard boxes use the 1KEY ULTRALOCK, a push button lock that shows at a glance whether a box is secured, and one key can be coded to several boxes on a pickup or across a whole fleet. Weather Guard offers it on saddle, lo-side, chest, wheel well and gull wing models, and the 117, 121 and 127 series use a rotary latch that opens with one touch.

Key control matters as much to security as the lock does. Weather Guard asks owners to register a new box so the key code stays on file, and replacement keys are ordered through Simply Keys using that code and the box type. Without the code, a lost key can mean a new lock rather than a new key, so keep the code with the truck records rather than on the key ring. Our Weather Guard truck boxes page covers the box styles that take each lock.

We install truck boxes ourselves, so a set of keyed-alike boxes goes onto your pickup mounted and ready to lock.

Weather Guard Truck Boxes

Job Site Habits, Keys and Charging for Overnight Security

Any lock only works when it is closed. Keep lids shut whenever a box is unattended, set boxes where they can be seen from the road or the site office, and lock a chest before any crane pick on the job so the lid cannot open in the air. Charging is a common gap in job site security, because batteries left on a bench overnight are an easy target. Many Knaack models carry a Power Pass grommet, a sealed pass-through that lets an extension cord into the box so batteries charge with the lid locked.

Decide who holds which keys at the start of each job, and keep the keys and warranty paperwork apart from the box they open. Knaack puts a three-year warranty on its job site storage, and a damaged hinge or lock is easier to claim with the paperwork at hand. The full Knaack job site boxes range lists which models carry the Power Pass.

Both of our showrooms open on Saturday mornings, so a foreman can sort out spare keys, casters or a replacement box before the next work week.

Knaack

Job Site Security Across Ladders, Racks and Boxes

Tools are only one part of job site security. Ladders on a rack, materials in a cargo van and equipment left at the curb of a job all need a plan, and the same layered thinking applies to each, from the hardware that holds it to the habits of the crew.

As you plan the rest of the vehicle, the racks and storage from each maker we carry are gathered in our ladder and truck equipment brands hub.

Planning Job Site Security With Our Team

A welded box, a lock that resists a bar, keys under control and a crew that closes the lid add up to tools still on the job in the morning. Send us the tools you need to protect or call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts, and we will quote the boxes, carts and truck storage behind your job site security, with full lines from Weather Guard truck and van equipment for the vehicle.

Job Site Security FAQs

What lock do Knaack job boxes use?

Knaack fits its patented Watchman IV lock system as standard across its line, with a three-point latch and a recessed, 7-gauge reinforced lock housing on the larger chests and piano boxes.

What lock does the Knaack Monster Box use on the job site?

Knaack describes the integrated recessed lock on the Monster Box 1010 as UL-rated and resistant to drilling and weather.

Can several truck boxes share one key?

Yes. Weather Guard codes the 1KEY ULTRALOCK so one key opens several boxes on a pickup or across a fleet, which keeps security simple from job to job.

How do I replace a lost Weather Guard key?

Replacement keys are ordered through Simply Keys using the key code and box type, so register each new box to keep the code on file.

Can tools charge inside a locked job site box?

Many Knaack models have a Power Pass grommet that lets an extension cord into the box, so batteries charge with the lid shut.

Is a tool cart a job site security risk?

An open cart can be raided when the crew steps away. The Knaack KAT-01 Armoured Transport adds steel panels and lockable steel doors for that reason.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder