Knaack range
Knaack Job Site Chests From 7 to 31 Cubic Feet, With JOBMASTER Sizes, the Monster Box, Trays, Casters and More
Lid-top steel job site storage with Watchman IV locking, welded piano hinges, Power Pass cord entry, caster-ready skids and a crane-lift option, sized from one tradesperson's kit up to a full crew.
Where a crew's tools spend the night is a daily problem on any job, and Nation Wide Ladder solves it with Knaack job site chests, sized by our team and delivered across New England. We supply the compact JOBMASTER 36 and 42, the crew-size JOBMASTER 4824 and 60 and the crane-ready Monster Box 1010, a range of 7 to 31 cubic feet, along with the trays and caster sets that go with them.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Who Buys Knaack Job Site Chests, From One Tradesperson to a Full Crew
A lid-top chest is the default secure box on most commercial and residential job sites. Carpenters, electricians, plumbers and mechanical crews lock away hand tools, power tools, cords and smaller equipment between shifts, and the smaller sizes add a second layer of protection inside a trailer. Knaack builds its JOBMASTER job site boxes from 16-gauge steel with fully arc-welded seams, finished in the tan powder coat the brand is known for.
The range splits by who owns the box. Knaack pitches the 19 inch deep Model 36 and 42 as personal boxes, sized for one tradesperson’s kit or a locked compartment in a work trailer. The 24 inch deep 4824 and 60 are crew boxes, with room for a compressor, saws, extension cords and long-handled tools such as shovels. The Knaack Monster Box 1010 goes further again, and Knaack positions it for the workshop or plant floor as well as an active job site. Each format suits gear that is bulky, heavy or awkward to shelve, because it can be lowered in from above and stacked.
Tell us who will use the chest and what goes in it on a typical job, and our team will match a Knaack size to that kit before you order.
Knaack JOBMASTER and Monster Box Chests by Model, 7 to 31 Cubic Feet
Compact JOBMASTER 36 and 42. The Model 36 measures 36 by 19 inches with a 21.5 inch closed height, holds 7 cubic feet and weighs about 97 pounds empty. The Model 42 is 42 by 19 by 23.375 inches with 9 cubic feet inside and adds a Power Pass grommet for feeding a cord into the box. Both lids lift from three sides, and both take the Knaack Model 41 accessory tray.
Crew-size JOBMASTER 4824 and 60. The Knaack JOBMASTER 4824 chest is 48 inches wide with 16 cubic feet of space, and the Model 60 stretches to 60 inches and 20.25 cubic feet, both 28.25 inches tall closed. These two use a three-point latch and a dampening spring that keeps the lid from slamming, and they take the larger Model 21 tray. The 60 rides on six skids rather than four.
Monster Box 1010. At 66 inches wide and 30 inches deep, the Knaack Monster Box 1010 holds 31 cubic feet on a heavy tubular steel frame. Its four-point crane lift is designed for center-point rigging, and its integrated recessed lock is one Knaack describes as UL-rated and resistant to drilling and weather.
Our Windham, NH and Worcester, MA showrooms both offer free in-person consultations, so you can weigh one Knaack chest against another with our team before you pick.
Steel, Watchman IV Latches and Welded Hinges on Knaack Job Site Chests
Every JOBMASTER we list pairs its 16-gauge body with 7-gauge four-way skids that come pre-punched for optional casters. Recessed side handles sit out of the way so they are less likely to get knocked off when the chest is loaded onto a truck, and the Power Pass grommet on the 42, 4824 and 60 keeps water out where the cord goes in. Knaack backs the JOBMASTER line with a three-year warranty.
Theft resistance comes from the patented Watchman IV lock system, which sets a 7-gauge reinforced lock housing into the box. The 36 uses a two-point latch, while the 4824 and 60 use three. The lid hangs on a full-length piano hinge that Knaack stacks and welds, so the back edge is as hard to attack as the front. The Knaack 36 is the one JOBMASTER we list without a Power Pass, which suits it to hand tools more than to cordless kits that charge overnight, and the dampening spring on the 4824 and 60 slows the lid on the way down, protecting the lid and the hands under it.
We have served contractors for over 50 years, and our team will walk you through which Knaack lock and charging details fit the way your crew works on the job site.
How Knaack Job Site Chests Work Alongside Piano Boxes and Field Stations
Chests rarely work alone on a larger job site. Where a crew pulls small fittings and parts all day, a front-opening Knaack STORAGEMASTER piano box keeps shelves at working height, and a Field Station gives the superintendent a dry, lockable base for drawings. Keeping chests for the bulky gear and shelving for the small parts lets each box do the job it was built for.
To see how other manufacturers fit the same job site, browse our ladder and truck equipment brands hub.
Sizing a Knaack Chest to Your Tools, Truck and Job Site
Lay out what has to go in before choosing a size. A single tradesperson’s kit usually fits a 36 or 42, while compressors, saws and shared crew gear call for the 4824 or 60. Choose the Monster Box when the chest must be hoisted between floors.
Check open height too, especially under job site scaffolding or inside a trailer. The 36 opens to 37.5 inches, the 42 to 39.5 inches, and the 4824 and 60 to 49.25 inches. Closed, the 36 stands 21.5 inches and the crew sizes 28.25 inches, while depth runs 19 inches on the compact pair against 24 on the crew sizes. Weight matters if you plan to roll the box, since the 4824 is about 158 pounds and the 60 about 190 pounds before anything goes in. The Knaack 495/695 caster set comes with 4 or 6 inch casters, two rigid and two swivel, all with brakes, and its 2,600 pound rating has to cover the chest plus its contents. Move a chest by its skids or recessed handles, never by the lid, and bring forks in from whichever side gives the straightest path.
Our own trucks deliver door to door across New England, so an order of Knaack job site chests can come straight to the job where your crew needs them.
Get a Quote on Knaack Job Site Chests
A locked chest sized to your kit, with the trays and casters that suit it, keeps tools ready for the next shift, and we quote Knaack job site chests to order. Send the models you need through our Request a Quote form, compare them in our job site boxes store, or see where they sit within the Knaack job site box range.
Knaack Job Site Chests FAQs
What is the difference between the Knaack JOBMASTER 36 and 42?
The 36 holds 7 cubic feet and the 42 holds 9 cubic feet, both 19 inches deep. The 42 adds a Power Pass grommet for running a power cord into the chest.
Can I add casters to Knaack job site chests?
Yes. The 7-gauge skids are pre-punched for the Knaack 495/695 caster set, which comes in 4 or 6 inch sizes with brakes and carries 2,600 pounds including the chest.
Which Knaack chest suits a whole crew on the job site?
The 24 inch deep JOBMASTER 4824 and 60, at 16 and 20.25 cubic feet, are the crew sizes, with room for a compressor, saws and cords. The Monster Box 1010 adds 31 cubic feet and a crane lift.
Can the Knaack Monster Box be lifted by crane?
Yes. The Monster Box 1010 has a tubular steel frame with a four-point crane lift designed for center-point rigging.
What warranty comes with Knaack job site chests?
Knaack lists a three-year warranty on the JOBMASTER chests.
Which Knaack chests have a Power Pass grommet?
Among the chests we list, the JOBMASTER 42, 4824 and 60 and the Monster Box 1010 include it. The Model 36 goes without.
Need help choosing the right Knaack equipment?
Talk to the team or send us your list and we will put a quote together.









