Fall Protection Equipment
Hard Hats in Cap and Climbing Styles, Type I and II Shells, Chin Straps, Earmuffs, Visors and More
Hard hats sorted by impact type and electrical class under ANSI/ISEA Z89.1, ERB Omega II caps beside the Bullhead climbing helmet, suspensions and sizing, add-on hearing, face and light gear, and daily checks.
Choosing hard hats for a crew means matching the impact type, the electrical class and the shell style to the work, and Nation Wide Ladder helps you make that match from the ERB and Global Glove Bullhead Safety helmets we list. Our range covers ERB Omega II cap style hard hats in white, yellow and an American flag edition, the Bullhead HH-CH2-CB climbing style helmet with a chin strap, and the earmuffs, face shield bracket, visors and clip-on light that mount to them.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Hard Hats by Impact Type and Electrical Class Under Z89.1
OSHA 1926.100 requires head protection wherever construction workers face a possible danger of head injury from impact, falling or flying objects, or electrical shock and burns, and it points to the ANSI Z89.1 standard. Every hard hat built to that standard carries two markings. The type covers impact, with Type I tested for blows and penetration at the crown, while Type II adds off-center penetration and impact energy attenuation tests, so Type II covers the sides of the head as well as the top.
The class covers electricity and sits apart from the type. According to the International Safety Equipment Association, Class C gives no electrical protection, Class G is tested at 2,200 volts and Class E must withstand 20,000 volts, and a Class C shell may carry vents for airflow. The 2026 edition of Z89.1 adds optional Type I+ and Type II+ designations, both requiring a chin strap and retention testing. Read both markings inside the hard hat shell rather than relying on a catalog line, because a few store and distributor listings show more than one class for a single model. Our fall protection best sellers place hard hats beside the harnesses that climbers wear with them.
Our team helps you select the type and class each role calls for, so a framer, a roofer and an electrician each wear hard hats rated for the hazard.
Cap Style and Climbing Helmet Hard Hats From ERB and Bullhead
Ground-level crews often wear a cap style hard hat, and the ERB Omega II is the one we list in three versions, the white 19131, the yellow 19132 and the white 19140 with an American flag. The ERB 19131 uses a 6-point woven nylon suspension with slide-lock sizing for head sizes 6.5 to 8, accepts a 2-point chin strap and has a removable brow pad. Distributor listings place the Omega II in Type I, and our ERB hard hats page covers the full set.
Work at height or in tight spaces moves the head in every direction, which favors a climbing style hard hat. The Bullhead Safety HH-CH2-CB is a Type 2, Class C helmet rated to ANSI/ISEA Z89.1-2014 and the 2024 edition, with an ABS shell, adjustable vents, a vented EPS foam liner, a pivoting ratchet with an EZ-click dial and a pre-installed four point chin strap. It fits hat sizes 6.5 to 8, and the HH-A7 kit replaces worn suspension padding. Being Class C, it is a helmet for jobs without electrical exposure, and our Global Glove safety helmets page goes deeper on it.
At our Windham and Worcester showrooms each worker can try a cap style and a climbing style shell before you order hard hats for the crew.
Earmuffs, Shields, Visors and Daily Checks for Hard Hats
Hard hat accessories keep a face shield, hearing protection and a work light on the head instead of in the truck. The Global Glove HP-M3 earmuffs carry a noise reduction rating of 22 dB, fit most slotted hard hats and caps, and swing between use, standby and storage. The HH-PB3 dielectric bracket snaps into the slots of Bullhead climbing helmets to hold a face shield, with an adapter that keeps the earmuffs in place. Global lists its HH-V71AF clear and HH-V73AF smoke anti-fog visors, both rated to ANSI/ISEA Z87.1-2020, for the HH-CH1 helmet, so we confirm fit before quoting one for an HH-CH2. The BH-LED1 clip-on light grips anything up to 4 millimeters thick and runs about six hours.
Inspection is simple and daily. OSHA shipyard guidance calls for a daily look at every helmet and suspension and prompt replacement of anything damaged, so a cracked shell, a stretched suspension or a strap that no longer holds is reason to retire a hard hat. Replacing pads costs less than replacing a hard hat, which is where replacement suspension padding earns its place.
Our trucks make regular weekly deliveries from New Hampshire to Maine, so a crew there can add earmuffs or a spare helmet without waiting on parcel freight.
Hard Hats Inside a Work-at-Height Kit
A climbing style helmet is chosen because of what the wearer climbs, so the hard hat decision sits beside the harness, the ladder and the staging. Our safety harnesses complete the kit for anyone who ties off.
When the ladders and access equipment come into the same order, you can scan the makers in our ladder and truck equipment brands hub.
Hard Hats Quoted by Type, Class and Quantity
Bring the site hazard list and Nation Wide Ladder will quote hard hats by type, class, color and quantity, marking which hard hat suits each role and which earmuffs and shields fit it. Helmets travel with the rest of an order on our trucks through Rhode Island, Connecticut, Massachusetts, New Hampshire, Vermont and Maine, and ship to any other state.
Hard Hats FAQs
What is the difference between Type I and Type II hard hats?
Type I covers blows and penetration at the crown only. Type II adds off-center penetration and impact energy attenuation tests, giving top and lateral protection.
Which hard hats suit electrical work?
Look for Class E, tested to withstand 20,000 volts, or Class G, tested at 2,200 volts. Class C hard hats offer no electrical protection.
Is the Bullhead HH-CH2-CB rated for electrical exposure?
No. It is a Type 2, Class C helmet, and Class C hard hats offer no electrical protection, so it suits jobs without electrical exposure.
What head sizes do these hard hats fit?
The ERB 19131 slide-lock suspension and the Bullhead HH-CH2-CB ratchet both adjust for sizes 6.5 to 8.
Can earmuffs mount on cap style hard hats?
Yes. The Global Glove HP-M3 cap mounted earmuffs fit most slotted hard hats and caps and are rated NRR 22 dB.
How often should hard hats be inspected?
Every day. OSHA shipyard guidance asks for a daily check of shell and suspension, and a damaged helmet is replaced right away.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.









