Global Glove range

Global Glove Safety Helmets, a Type 2 Climbing Style Shell With Vented Liner, Ratchet Suspension, Chin Strap and More

The Bullhead Safety HH-CH2-CB in white, blue, black and yellow, with its ABS shell, EPS foam liner, four point chin strap, Z89.1 Type 2 Class C rating and slots for earmuffs and headlamps.

A hard hat that slips off when you look up a ladder or lean into a crawl space protects nobody, and Nation Wide Ladder answers that with Global Glove safety helmets in a climbing style shell, fitted by our team to the work your crew does. We list the Global Glove Bullhead Safety HH-CH2-CB, a Type 2, Class C helmet with a vented EPS foam liner, a pivoting ratchet suspension, a four point chin strap and accessory and headlamp slots, in white, blue, black and yellow.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Where Global Glove Safety Helmets in a Climbing Style Earn Their Place

Global designed the HH-CH2-CB as a Type 2 industrial helmet for ground level work, work at height and confined spaces. Those three settings share a problem that a traditional cap style hard hat handles poorly, because the head moves in every direction. A roofer looks up the slope, an installer tips back under a soffit and a technician ducks sideways through an attic hatch. A brim and a loose suspension let the shell shift or fall, while a climbing style helmet sits closer to the skull and is held there by a strap under the chin.

The Type 2 rating matters for the same reasons. Work around ladders, scaffolds and lifts brings blows from beams, rungs and edges at the side as often as falling objects from above, and the HH-CH2-CB is built to protect against front, side and rear impacts. Global also points out that the shell is ultra lightweight, which counts on a long day spent looking up. For crews who climb, hang from a harness or work in tight spaces, Global Glove safety helmets in this style keep protection on the head through every awkward position.

We have equipped New England contractors for over 50 years, and our team will help you decide which crew members need a climbing style helmet and which tasks still suit a cap style hard hat.

Global Glove HH-CH2-CB – Bullhead Safety™ Head Protection Climbing Style Protective Helmet

Inside the Global Glove HH-CH2-CB, From ABS Shell to Ratchet Suspension

The shell of the Global Glove HH-CH2-CB is ABS in a matte graphite finish, chosen by Global for a rigid, lightweight helmet with weather and chemical resistance. On top, adjustable vents can be opened for airflow on a hot roof or closed in the rain. Underneath sits a padded channel lined with vented EPS foam, the impact absorbing layer that works with the shell on side and rear blows.

Fit on this Global Glove helmet comes from a premium suspension with a pivoting rear ratchet and an EZ-click retention dial, which lets the wearer snug the helmet to different head shapes with one hand. A soft, padded headband wicks sweat, and the suspension padding can be replaced with the HH-A7 kit rather than retiring the whole helmet when the pads wear. The four point chin strap comes pre-installed and adjusts to the wearer.

Each Global Glove helmet arrives fully assembled in a retail box and fits hat sizes 6.5 to 8. Our store listing offers the HH-CH2 in white, blue, black and yellow, which lets a site safety plan color code roles such as supervisors, visitors or a particular trade. That color system is up to your site, so ask us which shades fit your plan.

Compare the fit in person at our Windham, NH or Worcester, MA showroom, where a free consultation lets each crew member try the suspension and chin strap first.

Global Glove BH-LED1 – Bullhead Safety™ Clip on LED Light

Type 2, Class C and Z89.1 Ratings on Global Glove Safety Helmets

OSHA 1926.100 requires construction workers exposed to falling objects, impact or electrical hazards to wear protective helmets and points employers to the ANSI Z89.1 standard. Global rates the HH-CH2-CB to ANSI/ISEA Z89.1-2014 and the newer Z89.1-2024 edition. Under Z89.1, a Type 1 helmet protects against blows from above, while a Type 2 helmet also reduces the effect of side blows, which is the reason Global Glove safety helmets in a climbing style carry the Type 2 rating.

Class describes electrical protection, and the three classes are very different. Class G hard hats are proof tested to 2,200 volts and Class E models to 20,000 volts, while Class C models offer no dielectric protection and are allowed to have vents. The HH-CH2-CB is Class C, which fits its vented shell and makes it a helmet for jobs without electrical exposure. Global describes the ABS as nonconductive, but the rating on the helmet is what a safety plan should rely on, and for line work or panel work the rating to look for is E or G.

Our team checks the type and class your site safety plan calls for against each helmet before we quote, so the rating on the order matches the hazard on the job.

Global Glove HH-PB3 – Bullhead Safety™ Head Protection Dielectric Adjustable Bracket for Climbing Style Protective Helmets

Global Glove Safety Helmets as Part of an Access Plan

A climbing style helmet is chosen because of what the wearer climbs. Ladders, scaffold planks, aerial lifts and roof brackets all put the head near edges and overhead structure, and many jobs pair the helmet with a harness and lanyard. Planning head safety and access equipment together keeps both suited to the same task.

If you are also choosing the ladder or staging that helmet will go up, our ladder and truck equipment brands hub lists every maker we carry.

Global Glove HH-V71AF – Bullhead Safety™ Clear Anti-Fog Toric Visor for Climbing Style Helmet

Fitting Global Glove Safety Helmets and Adding Earmuffs, Lights or Shields

Set the suspension first. Open the ratchet dial, place the helmet level on the head with the brim line above the brow, then click the dial in until the helmet stays put when the wearer nods. Adjust the chin strap so it holds the helmet without pressing on the throat. A helmet that has to be pushed back into place every few minutes is too loose, and the dial is quicker to fix than a new helmet.

Accessory slots on each side of the Global Glove shell accept most cap mounted earmuffs and accessories, and headlamp slots let a lamp ride on an elastic band. Global’s HH-PB3 face shield bracket snaps into the slots of its climbing style models, and the HP-M3 earmuffs fit standard slotted hard hats. Global lists its clear and smoke toric visors for the HH-CH1 climbing helmet, so we confirm fit on the Global Glove HH-CH2-CB helmet before quoting one. The full set is on our Global Glove helmet accessories page.

Our own trucks deliver door to door across New England, so a crew’s hard hats and the accessories that fit them can arrive on the same delivery.

Global Glove HP-M3 – Hearing Protection Premium High-Visibility Cap Mounted NRR 22 dB Earmuffs

Order Global Glove Safety Helmets for Your Crew

We quote Global Glove safety helmets by color and quantity and check each accessory against the shell before it ships. Browse our helmet store category, or go back to the wider Global Glove safety gear range for gloves and knee pads.

Global Glove Safety Helmets FAQs

What type and class are Global Glove safety helmets in the HH-CH2 line?

The Global Glove HH-CH2-CB is a Type 2, Class C climbing style helmet rated to ANSI/ISEA Z89.1-2014 and Z89.1-2024.

Can a Global Glove climbing helmet be used for electrical work?

Class C hard hats are not tested for electrical insulation, so for electrical safety look for a Class E or Class G helmet instead.

What head sizes do Global Glove safety helmets fit?

The HH-CH2-CB fits hat sizes 6.5 to 8 and adjusts with a pivoting rear ratchet and EZ-click dial.

Does the Global helmet come with a chin strap?

Yes. A four point chin strap comes pre-installed, and the helmet arrives fully assembled.

Can I attach earmuffs or a headlamp to Global Glove safety helmets?

The accessory slots accept most cap mounted earmuffs, and the side headlamp slots hold a lamp on an elastic band.

Can the suspension padding be replaced?

Yes. Global sells replacement suspension padding as the HH-A7.

Need help choosing the right Global Glove equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder