Brand spotlight
ERB Hard Hats, From White and Yellow Omega II Caps to American Flag Editions, Class 2 Mesh Vests and More
Cap style head protection with slide-lock suspension, what the Z89.1 type and class markings mean, and a zippered mesh vest for crews working near traffic.
ERB hard hats give crews light, adjustable head protection for daily site work, and Nation Wide Ladder supplies them alongside the hi-vis vests that usually go on the same worker. We list the ERB Omega II cap in white, in yellow and in white with an American flag, plus the ERB 61817 Class 2 mesh vest with contrasting trim.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
The ERB Omega II Cap and Its Slide-Lock Hard Hat Suspension
All three ERB hard hats we carry use the Omega II cap shell, a front-brim style that keeps the profile compact under ceilings and in tight framing. The ERB 19131 white Omega II cap is the model with published specifications. Its 6-point woven nylon suspension uses slide-lock sizing for head sizes 6.5 to 8, and the hat accepts a 2-point chin strap for windy roofs. Goggle retaining slots on the suspension help keep eyewear in place.
Comfort matters across a long shift. The brow pad wicks moisture and comes out for washing or replacement, which helps keep a shared fleet of ERB hats fresh. Distributor listings also show the 19131 meeting the low temperature option and carrying third-party SEI certification. Because the slide-lock sizing is quick to reset, one hat can pass between workers on a shared site, though each wearer should adjust it to sit snug and level before starting work.
The yellow 19132 and the ERB 19140 white cap with American flag share the Omega II shell. Color is usually a site policy decision, so check your company’s code before ordering a batch of ERB hard hats in one shade.
Send us a list with quantities by color, and we will quote the ERB hard hats and vests together so a whole crew is outfitted on one order.
Reading the Type and Class Markings on ERB Hard Hats
Every hard hat built to ANSI/ISEA Z89.1 carries a type and a class. The International Safety Equipment Association describes Type I helmets as protecting the top of the head, while Type II helmets add lateral protection. Class G helmets are tested at 2,200 volts and Class E at 20,000 volts, while Class C offers no electrical protection at all.
Distributor listings place the Omega II cap in Type I. Some of those listings print Class C, E and G together, which cannot all describe one hard shell, so read the class marking inside the hat before relying on it near energized lines. OSHA’s shipyard guidance adds that helmets and suspensions should be inspected daily, maintained as needed and replaced promptly once damaged, and a cracked shell or a stretched suspension is reason enough to retire an ERB hard hat.
Tell us the hazards on your site, and our team will help match each ERB hat and its markings to them before you buy.
ERB Hard Hats as Part of a Full Site Safety Kit
Head protection is one layer of the kit. Crews working at height add fall protection and stable ladders, and roadway crews add hi-vis apparel, so the hat is usually ordered with gear from several makers.
For the other safety and access manufacturers on our list, look through our ladder and truck equipment brands hub.
ERB 61817 Class 2 Vest to Wear With Your Hard Hats Near Traffic
The ERB 61817 Class 2 vest is a zippered mesh vest with contrasting trim, sold in the ERB S383P line. Retail listings for that line describe ANSI/ISEA 107-2015 Type R, Class 2 performance, 100 percent polyester mesh and 2 inch silver reflective tape set on a contrasting backing. Six pockets, with two at the waist and two at the chest outside plus two inside at the waist, and a pair of mic tabs make it a working garment rather than a cover-up.
Type R is the roadway category. The Federal Highway Administration accepts ANSI/ISEA 107-2015 Type R garments in Performance Class 2 or 3 for workers, including flaggers, who face traffic in temporary traffic control zones. Paired with ERB hard hats in a color your site recognizes, the vest keeps a worker visible from head to torso. The S383P line is listed in lime and orange across sizes from small to 5XL, so a mixed crew can be fitted from one style, and the zipper front makes it easy to wear over a winter jacket.
Our own trucks deliver vests and ERB hard hats door to door across New England, and we ship anywhere in the US for crews outside the region.
Buy ERB Hard Hats and Vests Through Our Team
After more than 50 years of supplying contractors and homeowners, we quote ERB hard hats and vests at 603-434-6911 in NH and 508-754-3030 in MA, through our quote request form, or from our ERB Industries store.
ERB Hard Hats FAQs
What type and class are ERB hard hats?
Distributor listings place the Omega II cap in ANSI/ISEA Z89.1 Type I. Check the class marked inside each hat before electrical work.
What head sizes do ERB Omega II hard hats fit?
The 19131 slide-lock suspension adjusts for head sizes 6.5 to 8.
Can I add a chin strap or goggles to an ERB hard hat?
The 19131 accepts a 2-point chin strap and has goggle retaining slots on its suspension.
How often should ERB hard hats be inspected?
OSHA guidance says helmets and suspensions should be inspected daily and replaced promptly when damaged.
Is the ERB 61817 vest suitable for roadway work?
Retail listings for its S383P line give ANSI/ISEA 107-2015 Type R, Class 2, a level FHWA accepts for workers in temporary traffic control zones.
Need help choosing the right ERB Industries equipment?
Talk to the team or send us your list and we will put a quote together.









