Werner Specialty Ladders
Werner Step Stands in the TW370-30 Aluminum Series, 2, 3 and 4 Foot Heights With Two Climbing Sides and More
Low portable work stands for ceilings, shelving and fit-out, Type IA 300 pound rating, extra width, steel hinges, slip-resistant steps, mar-resistant feet and the limits of aluminum near power.
Plenty of interior work sits just out of reach from the floor, where a full step ladder is more than the job needs and a bucket or chair is unsafe, and Nation Wide Ladder fills that gap with Werner step stands, low aluminum platforms you can climb from either side. We quote the TW370-30 series in 2, 3 and 4 foot heights, rated Type IA for 300 pounds, and we help you match each Werner step height to the reach your crew needs.

- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Where Werner Step Stands Earn Their Keep
Drywall finishers taping a ceiling, painters cutting in at the top of a wall, warehouse and retail staff working high shelves and installers hanging fixtures all spend the day a few feet off the floor. Werner calls the TW370-30 a portable work stand, and its low height and wide footprint make it quicker to move and climb than a taller step ladder for that kind of work. Werner designs the stand for work on both sides, so a user can step up from whichever side faces the task without turning it around.
Improvising is the real risk at that height, and it usually starts with whatever is closest to hand, such as a chair, a crate or an upturned bucket. Cal/OSHA warns against placing ladders on boxes, barrels or other unstable bases, and against using any ladder for a purpose it was not designed for, and OSHA bars carrying any load that could cause a fall. A stand built and rated for standing gives a stable base where crates and chairs do not.
Over 50 years of supplying contractors and homeowners has shown us how often a low Werner stand saves a crew from working off a ladder that is too tall for the room.
Werner TW370-30 Step Stands by Height and Build
We list three Werner step stands. The TW372-30 stands 2 feet high, the Werner TW373-30 aluminum step stand stands 3 feet and the TW374-30 stands 4 feet. All three carry a Type IA rating at 300 pounds, the extra heavy-duty class on the Cal/OSHA scale, and OSHA counts the climber, tools and materials together against that figure.
Werner builds the series in aluminum as a portable work stand, with heavy steel hinges, slip-resistant steps and mar-resistant feet that help keep the stand from sliding on finished floors. The extra width gives a broad base for side-to-side reach, which helps when taping a long ceiling joint or stocking a wide shelf bay. OSHA requires the steps of portable metal ladders to be corrugated, knurled, dimpled, coated or otherwise treated to resist slipping, which is the job of the slip-resistant step surface.
Choose the height by the reach you need from a comfortable standing position, since Werner offers the same build and rating at every size. The 2 foot TW372-30 suits most ceiling taping in standard rooms, while the 4 foot TW374-30 helps with higher ceilings and top shelving.
Our team checks the height and rating against the rooms and shelving you describe, so the Werner step stands on your quote fit the work.
Using and Caring for Werner Step Stands
Set the Werner stand fully open on a firm, level and dry surface, and keep the area around it clear of cords and offcuts. Cal/OSHA asks users to keep the body near the middle of the step and to avoid overreaching, which matters on a stand because the next spot is only a short move away, so climb down and shift it rather than lean out over the edge. Keep one person on it at a time unless the manufacturer says otherwise, as Cal/OSHA advises for ladders generally.
Aluminum sets one firm limit. Cal/OSHA says metal ladders should never be used for work on or around exposed electrical parts, and OSHA requires nonconductive side rails wherever a worker could contact exposed energized equipment. Electricians working near live parts should choose a fiberglass Werner stepladder instead.
Before each use, Cal/OSHA asks for a check for dents, bends, loose parts, sharp edges and corrosion on metal ladders, along with secure hardware and working hinges. Keep the steps free of oil, grease and dust, as OSHA requires. Werner recommends retiring a damaged ladder rather than repairing it, and the same caution applies to a bent stand.
Saturday morning hours at both our locations make it easy to pick up a Werner stand before a weekend job.
Werner Step Stands in an Interior Equipment Mix
A stand covers the low reach while stepladders, a Werner podium and van shelving cover the rest. Keeping a stand on each floor of a building removes the temptation to grab a chair, and other special designs sit under Werner specialty ladders.
For van shelving and storage from other makers, compare the options in our ladder and truck equipment brands hub.
Ordering Werner Step Stands From Our Team
Three heights from 2 to 4 feet, a 300 pound rating and two climbing sides make a low stand a quick fix for work just out of reach. Send us the heights and quantities, or call 603-434-6911 or 508-754-3030, and we will quote Werner step stands for your crew, with the full Werner store range and our Werner brand page to hand.
Werner Step Stands FAQs
What heights do Werner step stands come in?
The TW370-30 series comes in 2, 3 and 4 foot heights, the TW372-30, TW373-30 and TW374-30.
What load rating does the TW370-30 carry?
All three are rated Type IA for 300 pounds, counting the user, tools and materials.
Can I climb Werner step stands from either side?
Yes. Werner designs the TW370-30 for work on both sides.
Can I use an aluminum step stand near live wiring?
No. Cal/OSHA says metal ladders should never be used on or around exposed electrical parts, so use fiberglass for that work.
Do Werner step stands protect finished floors?
Werner fits them with mar-resistant feet that also help keep the stand from slipping.
Need help choosing the right Werner equipment?
Talk to the team or send us your list and we will put a quote together.


