Werner Specialty Ladders
Werner Trestle Ladders in the E7400 Fiberglass Extension Series, 10 and 16 Foot Models for One or Two Users and More
A self-supporting base with a sliding middle section, Type IA 300 pound rating, knee-braced Traction-Tred steps, spring-loaded locks, nylon-coated guides, rail shields and OSHA spacing rules.
Work in an open room that is too high for a step ladder and has nothing to lean an extension ladder against is a common headache, and Nation Wide Ladder answers it with Werner trestle ladders, which pair a self-supporting base with an extension section that slides up for extra reach. We quote the E7400 fiberglass series in 10 and 16 foot sizes, rated Type IA for 300 pounds, and we help you choose the Werner trestle size and setup for your crew.

- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Where Werner Trestle Ladders Fit the Work
OSHA defines an extension trestle ladder as a self-supporting portable ladder that adjusts in length, made of a trestle base and a vertically adjustable extension section with a way to lock the two together. That combination stands on its own like a step ladder yet reaches higher like an extension ladder, which suits atriums, warehouses, gymnasiums, theaters and open retail floors where there is no wall to lean on.
Werner designs its E7400 for one-person or two-person jobs, so a pair of installers can work a fixture or beam together, provided the combined load stays within the single rating. Painters, electricians, sign installers and facility crews are the usual buyers. Fiberglass rails meet OSHA’s call for nonconductive side rails where a worker or the ladder could contact exposed energized equipment, which suits lighting and electrical work overhead, though Cal/OSHA warns that a wet ladder conducts.
Werner builds these for upright work, and OSHA requires each ladder to be used only for its designed purpose, so the E7400 stays upright and is never laid flat as a plank or bridge.
Our team helps you weigh a Werner E7400 against a podium or an extension ladder for each space, so the quote reflects the rooms you actually work in.
Werner E7400 Trestle Sizes, Locks and Rail Protection
We list two sizes of the Werner E7400 fiberglass extension trestle ladder, the E7410 at 10 feet and the E7416 at 16 feet. The 10 foot model covers lower open rooms, and the 16 foot model reaches higher atriums, stages and gym lighting. Both are rated Type IA at 300 pounds, the extra heavy-duty class on the Cal/OSHA scale, and Cal/OSHA caps both the base section and the extension section of an extension trestle ladder at 20 feet.
Werner gives the E7400 extra-wide Traction-Tred steps that are slip-resistant, knee-braced and double-riveted. A spring-loaded locking mechanism makes the extension section easier to raise and set, and nylon-coated guide sleeves cut friction and wear as it slides. External rail shields and Werner’s EDGE bracing system guard the rails, with an aluminum external rail shield taking abrasion at the foot.
OSHA sets its own spacing for this design. Steps on the base of an extension trestle ladder sit 8 to 18 inches apart on center, while rungs on the extension section sit 6 to 12 inches apart.
At our Windham and Worcester showrooms you can raise an E7400 extension and test the lock action before you order.
Setting Up and Caring for Werner Trestle Ladders
Open the base fully on a stable, level floor and confirm it is locked before raising the extension section. Werner’s spring-loaded lock and nylon-coated sleeves make that adjustment smooth, but the check still matters on every setup. Engage the spring-loaded lock at the chosen height and check it holds before climbing. OSHA bars moving, shifting or extending a ladder while anyone is on it, so adjust the height with both feet on the floor.
Count the load carefully on two-person jobs, where it climbs quickly. OSHA defines the maximum intended load as every worker, tool and material on the ladder at one time, and the E7400’s 300 pound rating covers that total. Keep the area around the base clear, barricade the ladder in a passage or doorway, and face the ladder while climbing with at least one hand on it.
Before each use, Cal/OSHA asks for checks of rails, steps, hardware and feet, that movable parts work without binding, and that fiberglass shows no cracks, chips or heat damage. Store fiberglass out of sunlight, and secure the ladder in transit, since Cal/OSHA notes that vibration and bumping can damage ladders. Werner recommends retiring a damaged ladder rather than repairing it.
Our weekly delivery run from New Hampshire to Maine brings a trestle to crews there without a long drive.
Werner Trestle Ladders Within a Facility Ladder Fleet
A Werner E7400 usually works alongside podiums, step ladders and extension ladders on facility and theater crews, where a long ladder covers the walls and the trestle covers the open floor, and the other special designs sit under Werner specialty ladders.
To see storage and transport gear from other makers, check the brands in our ladder and truck equipment brands hub.
Quotes on Werner Trestle Ladders for Open Spaces
A self-supporting base, a sliding extension and a 300 pound fiberglass build give crews reach in rooms with nothing to lean on, from atriums and gyms to warehouse aisles. Send us the ceiling heights and quantities, or call 603-434-6911 or 508-754-3030, and we will quote Werner trestle ladders for your work, with the full Werner store range and our Werner brand page one click away.
Werner Trestle Ladders FAQs
What sizes do Werner trestle ladders come in?
The E7400 series comes in two sizes, the E7410 at 10 feet and the E7416 at 16 feet.
Can two people use Werner trestle ladders?
Werner designs the E7400 for one-person or two-person jobs. The 300 pound rating covers everyone and everything on the ladder together.
What are Werner trestle ladders rated for?
The E7400 is rated Type IA for 300 pounds.
Can I raise the extension on Werner trestle ladders while standing on them?
No. OSHA bars extending a ladder while it is occupied, so set the height before climbing.
Are Werner trestle ladders nonconductive?
The E7400 has fiberglass rails, which meet OSHA's call for nonconductive side rails near exposed energized equipment. Keep them clean and dry.
Need help choosing the right Werner equipment?
Talk to the team or send us your list and we will put a quote together.


