Alum-A-Pole Pole Scaffold

Alum-A-Pole Stages and End Rails, From 16, 20 and 24 Foot Two-Person Planks to 14 and 20 Inch Rail Systems and More

Model sizes and the 500 lb two-person rating, open-hole decks and square rungs, linking stage to stage on pump jacks, SNERS end rails, and the OSHA platform rules for width, gaps and overhang.

We quote Alum-A-Pole stages for pump jack crews who need a firm, linked walkway along a wall, with the ends closed off so nobody steps into open air. Nation Wide Ladder lists 14 inch wide stage models in 16, 20 and 24 foot lengths, plus the SNERS end rail system in 14 and 20 inch sizes, and our team helps you match stage lengths, rails and pump jacks to the run of the wall.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Where Alum-A-Pole Stages Fit on Pump Jack Scaffolding

On a pump jack scaffold the stage is the part you stand on. Alum-A-Pole stages span between two pump jacks, rise with them as the crew pumps, and link end to end so a single walkway can run the length of a house. Alum-A-Pole calls its stage line Alum-A-Scaff and builds every stage to the same rail height, which is why each stage in a run lines up flush with the next.

The deck is open-hole industrial decking, which gives a non-slip surface that sheds water and debris, and the rungs are square rather than round for more stability underfoot. End rungs are shaped so that linked stages hinge without overlapping, carry handles make each stage easier to move between elevations, and male and female ends lock onto the pump jack or workbench and are secured with the Saf-T-Chain. Alum-A-Pole makes its stages in 14, 20 and 24 inch widths up to 24 feet long, and each stage, like the rest of the system, is aluminum, so it conducts electricity and needs distance from power lines.

Having served homeowners and contractors for over 50 years, we can help you decide how many Alum-A-Pole stages a wall needs and where the joints should fall.

Alum-A-Pole Stages – 2 Man 500lbs Rated Stages

Alum-A-Pole Stages by Model, A1416, A1420 and A1424 in 16, 20 and 24 Foot Lengths

The Alum-A-Pole stages we list share a 14 inch width and a two-person, 500 pound rating, and differ in length. The A1416 is 16 feet, the A1420 is 20 feet and the A1424 is 24 feet. Alum-A-Pole pole packages use the same 14 inch by 24 foot stage, so a package and a separately ordered A1424 match on the wall.

Length decides the spacing of the poles. Each stage needs a pole and pump jack at each end, and OSHA’s general scaffold rule asks for every platform end to extend at least 6 inches past its support unless it is cleated or restrained. A shorter stage makes sense on walls broken up by bump-outs, porches or windows that split the run, and on tight lots where a 24 foot plank is awkward to carry. A longer stage covers more wall per bay and needs fewer poles along a long, plain elevation. Mixing lengths on one run is common, since linked stages share the pole between them.

Send us the wall lengths and openings on the job, and we will quote the mix of Alum-A-Pole stages that covers them with the fewest poles.

Alum-A-Pole – End Rail System

End Rails, Linking and OSHA Platform Rules for Alum-A-Pole Stages

The open end of a stage is where walk-off falls happen, and the Alum-A-Pole end rail system closes it. We list the SNERS-14 for a 14 inch stage and the SNERS-20 for a 20 inch one, and both attach to Alum-A-Pole stages only. Alum-A-Pole says the rails install easily and slide to any position along the stage, so they can sit right at the end of the deck or wherever the walkway stops. The 22 foot Saf-T-Net from the same maker fits only the Alum-A-Scaff line as well.

OSHA’s general rule, 29 CFR 1926.451, sets the platform basics. Pump jack platforms can be as narrow as 12 inches, gaps between deck units stay at 1 inch or less, and the front edge sits within 14 inches of the wall unless guardrails or fall arrest are in place. On platforms 10 feet or shorter, an end may overhang its support by no more than 12 inches unless it is designed for it or guarded, and overlapped platforms overlap by at least 12 inches over a support. Anyone more than 10 feet above a lower level needs fall protection.

Our Windham, NH and Worcester, MA showrooms offer free in-person consultations, where you can check end rail sizes against Alum-A-Pole stages with us.

How Alum-A-Pole Stages Travel With a Crew’s Ladders and Racks

A 24 foot stage has to get to the house before it can go up the wall, which puts the truck rack in the same plan as the scaffold. Crews running pump jacks also carry extension ladders for roof access and brace setup, so the rack, the ladders and the scaffold tend to be bought around each other. Sizing the rack to the longest stage on the order saves a second trip to the house.

To compare the rack and ladder makers that carry that load, look through our ladder and truck equipment brands hub.

Get Alum-A-Pole Stages and End Rails Quoted for Your Run

A level, linked deck with closed ends lets a crew work the whole wall, and Nation Wide Ladder quotes Alum-A-Pole stages with the end rails, pump jacks and poles that complete the run, delivered door to door across New England. See how they fit into the full system on our Alum-A-Pole pump jack scaffolding overview, read the Alum-A-Pole brand page, or browse the Alum-A-Pole store.

Alum-A-Pole Stages FAQs

What sizes are Alum-A-Pole stages?

We list the A1416, A1420 and A1424, all 14 inches wide and 16, 20 and 24 feet long. Alum-A-Pole also makes 20 and 24 inch widths.

How much weight can Alum-A-Pole stages carry?

The stages we list are rated for two people and 500 pounds.

Do Alum-A-Pole end rails fit other brands of stage?

No. Our listing says the SNERS-14 and SNERS-20 attach to Alum-A-Pole stages only.

Can Alum-A-Pole stages be linked together?

Yes. Alum-A-Pole builds every stage to the same rail height, and linked stages share a pole and pump jack at the joint.

How narrow can a pump jack platform be under OSHA?

29 CFR 1926.451 allows pump jack platforms as narrow as 12 inches, against 18 inches for most other supported scaffolds.

Why are the rungs on Alum-A-Pole stages square?

Alum-A-Pole uses square rungs to add stability, paired with open-hole decking for a non-slip surface.

Need help choosing the right Alum-A-Pole equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder