Resources
What to Plan Before a Van Upfit, From Roof Height and Wheelbase to Shelving, Bulkheads, Ladder Racks and More
The vehicle details that decide which kits fit, interior layouts by trade, steel or composite partitions, rack styles, mount kits and ladder count for a cargo van.
A van upfit goes smoothly when the vehicle details and the work are settled before anything is ordered, and goes badly when a kit arrives for the wrong roof. Nation Wide Ladder helps you confirm make, roof height and wheelbase, then plan Holman and Weather Guard shelving packages, drawer units, steel or composite bulkheads and Clamp & Lock, drop down or cargo racks with the right mount kit, and installs the whole layout.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Start a Van Upfit With Make, Roof Height and Wheelbase
Almost every part of an upfit is tied to three facts about the vehicle, its make, roof height and wheelbase. Weather Guard gives each Weather Guard van package its own kit number on that basis. A full-size Ford Transit takes 600-8110R on the 130 inch wheelbase and 600-8110L on the 148, the mid roof uses 600-8210R or 600-8210L, and the high roof uses 600-8410L or the extended 600-8410X. A RAM ProMaster runs from 600-8440S on the 118 inch wheelbase to 600-8440X on the 159 inch extended length.
Holman works the same way, and we list more than 200 Holman van shelving packages, each matched to a make, wheelbase and roof height, with 43, 46 or 60 inch shelving named in the title. Taller units make better use of a high roof van, while the shorter heights suit low roofs and compact vans. To confirm the configuration, check the door jamb label, the registration or the original window sticker, and if the roof height is unclear, measure from the cargo floor to the roof at the center. Getting those three facts right is the first step of any upfit, since a kit built for one roof will not fit another.
Our team checks the kit and part numbers against your make, roof height and wheelbase before quoting, so the van upfit you order fits the vehicle in the driveway.
Inside the Van Upfit With Shelving, Drawers and a Bulkhead
Weather Guard treats one bulkhead and three shelving units, two on the driver side and one opposite, as a balanced starting layout for most trades. Its fuller upfit list adds rigid flooring with Hi-Viz sills, wall liners, lockable drawer units such as the ITEMIZER and PACK RAT, and hooks, bins and tank racks. Holman lays its packages out by trade, from HVAC, electrical and plumbing to telecom, security and locksmith work, and its Quick Packages step from GO to PRO to MAX, adding drawer units, a shelf door kit and finally locking shelf drawers.
The bulkhead deserves its own decision. Weather Guard bulkheads come in steel, with pre-punched holes for accessories and a center section that can become a locking swing door, or in composite, which is lighter and fits the opening closely to cut cab noise and help the heater and air conditioning. Weather Guard describes its steel bulkheads as compliant with FMVSS standards for cargo vans. Plan heavy stock for the lower shelves and the most-used items nearest the side or rear doors, and leave room for drawer units and parts cabinets you may add later. Choosing the bulkhead early also fixes the front wall that every shelf in the upfit is planned against.
Our Windham, NH and Worcester, MA showrooms offer free consultations, so you can compare steel and composite bulkheads and open a drawer unit before the van comes in.
The Roof Half of a Van Upfit, From Rack Style to Mount Kit
Ladders and long stock belong overhead, so the floor stays free for shelving. Holman van racks cover the main styles. A Clamp & Lock rack holds the ladder with a crossbow and no straps, a drop down ladder rack brings the ladder down beside the van on a handle, and cargo and crossbar racks carry pipe, conduit and sheet goods. Weather Guard offers its own roof racks too, including the EZGLIDE2 drop-down and the Safari rack.
Count the ladders first, since single and double kits differ, and note the longest one, because Holman sells a 24 inch extender for long, heavy extension ladders on a drop down rack. Most Holman van racks list a separate mount kit specific to the make and roof height, so read the kit contents before ordering. Material matters as well. Steel suits the heaviest work, while HD aluminum keeps weight off the roof, which counts most on a compact van with a small payload. Weather Guard treats roof racks as optional extras beside the shelving and bulkhead core, so budget the rack as its own line in the upfit.
We install racks and interiors alike, so the roof and the cargo area of your van go in as one job and are checked together before the first load.
Planning the Whole Van Upfit Before Ordering
Holman designs its roof system to work with its interiors, and Weather Guard offers an online Van Configurator for laying out a van by trade, model and workflow. Either way, deciding the roof and the interior together saves a second upfit visit.
You can look across every van equipment and ladder maker we carry in our van, truck and ladder brands hub.
Your Van Upfit, Quoted and Installed
Make, roof height, wheelbase, trade and ladder count shape every van upfit, and Nation Wide Ladder turns those details into one quote for shelving, bulkhead and rack, delivered on our own trucks across New England. Call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts to start.
Van Upfit FAQs
What do I need to know before a van upfit?
The make, roof height and wheelbase decide which upfit parts fit, then come your trade, what you carry inside and how many ladders ride on the roof.
Where do I find my van roof height and wheelbase?
The door jamb label, the registration or the original window sticker usually states the configuration. If unsure, measure from the cargo floor to the roof at the center.
What comes in a basic van upfit package?
Weather Guard 600 series kits pair adjustable shelving with a bulkhead, and Holman Quick Package GO pairs a bulkhead partition with three shelving units.
Should a van upfit include a bulkhead?
Weather Guard treats the bulkhead as a core part of a standard upfit because it protects the driver from shifting cargo.
Do van racks need a separate mount kit?
Most Holman van racks list a mount kit specific to the make and roof height, while some kits bundle the rack, mechanism and mount kit together.
Can I add to a van upfit later?
Yes. Holman and Weather Guard both describe their packages as a starting point that drawers, cabinets, bins and other accessories can be added to.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.








