Roofing Equipment

Roof Brackets in Fixed and Adjustable Steel, With Chimney Supports, Ridge Hooks, Chicken Ladders and More

Acro 16 and 19 inch brackets at 45, 60 and 90 degrees, the four-angle 29038, Ultimate Ridge Hooks and chimney brackets for work at the peak, roof ladder hooks, crawling boards and OSHA nailing and width rules.

Roof brackets give a roofer level footing and a ledge for bundles on a pitched roof, and the challenge is matching bracket angle and plank size to the pitch, which our team at Nation Wide Ladder checks before every order. We supply Acro fixed and adjustable roof brackets, chimney brackets, Ultimate Ridge Hooks, the Acro steel ridge hook, and Acro chicken ladder hooks and sections.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Sixteen and Nineteen Inch Roof Brackets Matched to Pitch and Plank

Fixed roof brackets hold one angle, which makes them quick to nail on when a crew works the same pitch every day. Acro builds the ones we list in all steel with safety yellow powder coat, and every model shares four offset nail slots that stop it sliding up the nails, a back-stiffening rib against twisting, smooth edges and rounded corners, and a square bottom for pounding it out once the course is done. Each comes in a standard box of 12. The 16 inch Acro roof brackets come at 45 degrees for a 2×6 plank, at 60 degrees for a 2×6, and at 90 degrees in versions for a 2×4 plank or a 2×6. Acro’s 19 inch models hold 45 degrees for a 2×6 or 2×8 plank, and their added length, by Acro’s account, opens up more space between plank and nailed shingle.

Crews who change pitch from job to job also carry the Acro 29038 adjustable steel roof bracket. Its four positions are 33, 45, 60 and 90 degrees, where it accepts a 2×6, 2×8 or 2×10 plank, with a 2×12 allowed only at the two lower settings, and the 16 inch frame folds flat for the truck.

Send the pitches and plank sizes on your next roofs to 603-434-6911 or 508-754-3030, and we quote the bracket count by the box.

ACRO 11610 – Reinforced Chicken Ladder Hook

Chimney Roof Brackets and Ridge Hooks for Work Around the Peak

A chimney that rises off the peak is awkward to stage, because the roof falls away on both sides of it. Chimney brackets attach to the roof and give a level base to hold a platform there, and we list the NWCB chimney brackets alongside the Ultimate Ridge Hooks, sold as one complete pair. The ridge hooks straddle the peak and carry 2×8 framing lumber as a nailing base for roof brackets or chimney brackets, so staging can hang off both sides of the ridge without penetrating the roof sheathing. They carry a 1,750 pound load rating at a 45 degree angle, adjust from 4/12 to 12/12 and suit metal, slate and shake roofs as well as shingles.

Work on an off-the-peak chimney follows a set order. The crew stages on the low side, planks up to a comfortable working height, then planks over to the roof to reach the high side, with chimney brackets and the ridge hooks carrying the load. Because the hooks carry roof brackets too, the same pair serves any staging near the ridge on a roof that should not be nailed.

Bring your chimney measurements to our Windham, NH or Worcester, MA showroom, where a free consultation sorts out the bracket and plank layout.

NWL NWCB – Chimney Brackets

Chicken Ladders, Plank Rules and Safe Setup With Roof Brackets

Getting up the slope takes a hook over the ridge. For the climb itself, Acro’s 11084 steel ridge hook clamps to a single ladder with D-rungs or round rungs, wheels up over the shingles and then flips across the ridge to lock in place, carrying up to 300 pounds. The Acro 11601 chicken ladder section is a 72 by 20 inch crawling board with hand welded raised steel rungs, and it joins the 11610 hook, whose 10 inch hook carries a 1/2 inch reinforcement rod and a wheel, for a rolling climb of up to 24 feet. OSHA expects crawling boards in roof work to run from the peak to the eaves, secured by ridge hooks or an equivalent, and each worker on one needs a personal fall arrest system, a guardrail or a 3/4 inch grabline beside it.

In OSHA’s terms, planks laid on roof brackets form a roof bracket scaffold. That rule asks for brackets shaped to the pitch with level support for the plank, fastened with nails or, where nails are impractical, with first-grade manila rope of 3/4 inch diameter or an equivalent. The platform must be at least 12 inches wide, and each plank end extends at least 6 inches past the centerline of its support unless cleated or hooked.

Our own trucks deliver brackets, hooks and crawling boards door to door across New England, so a crew can stage the roof on day one.

ACRO 11084 – Steel Ridge Hook

Roof Brackets as Footing Inside a Fall Protection Plan

Roof brackets give footing, yet they do not guard an edge 6 feet or more above a lower level, so pitched jobs pair them with edge guardrails that nail on in the same pass or with a roof anchor and harness. Our roofing equipment section sets roof footing beside the hoists and guardrails on the same job, and the Acro roof brackets and ridge hooks page details each Acro model.

You can line up the ladder and fall protection makers that complete a roof setup in our roof, ladder and safety brands hub.

ACRO 16″ Roof Bracket 45* 2×6 Plank

Boxes of Roof Brackets Quoted by Pitch and Plank

Roofers have bought brackets and staging from Nation Wide Ladder for over 50 years. We quote roof brackets by the box with the ridge hooks, chimney brackets and crawling boards each roof calls for, shipped from Windham, New Hampshire and Worcester, Massachusetts to Connecticut, Rhode Island, Massachusetts, New Hampshire, Vermont and Maine.

Roof Brackets FAQs

What angles do fixed roof brackets come in?

The Acro 16 inch brackets we list come at 45, 60 and 90 degrees, and the 19 inch brackets at 45 degrees. For mixed pitches, the adjustable 29038 offers four settings from 33 to 90 degrees.

Which plank sizes fit roof brackets?

The 16 inch fixed brackets take a 2x6 plank, or a 2x4 at 90 degrees, the 19 inch brackets take a 2x6 or 2x8, and the 29038 takes 2x6 to 2x10 planks, plus a 2x12 at 33 or 45 degrees.

Can roof brackets be used without nailing into the roof?

OSHA calls for nails unless nailing is impractical, then 3/4 inch manila rope or an equivalent. The Ultimate Ridge Hooks carry roof brackets on 2x8 lumber at the ridge without penetrating the sheathing.

How much weight do Ultimate Ridge Hooks hold?

The listing gives a 1,750 pound load rating at a 45 degree angle, with adjustment from 4/12 to 12/12 pitch.

What length do chicken ladder sections come in?

The Acro 11601 section is 72 by 20 inches, and sections combine with the 11610 hook for a climb of up to 24 feet.

Are roof brackets sold singly or by the box?

The Acro fixed roof brackets we list come in a standard box of 12.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder