Van Upfitting

Conduit Carriers in Aluminum Box, Round Tube and PVC End Cap Kit Styles for Van and Truck Racks and More

K&W, Weather Guard and Vantech aluminum tubes compared by length and cross section, PVC kits from Holman, Vantech and System One, and how each one mounts to a roof rack crossbar.

With conduit carriers on the roof rack, pipe, conduit and trim ride inside a closed tube instead of strapped loose across the crossbars, and Nation Wide Ladder sizes the carrier to your stock and your rack, then installs it. We list aluminum box carriers from K&W and Weather Guard, the round Vantech tube with dividers, Holman aluminum carriers with a 48 inch extension, and PVC kits from Holman, Vantech and System One that turn your own pipe into a carrier.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Aluminum Conduit Carriers Sized by Length and Cross Section

Aluminum conduit carriers arrive ready to bolt on, with the tube, door and end cap built as one piece. The K&W aluminum conduit carrier is a square box listed as the CC88126, 8 inches high, 8 inches wide and 126 inches long, in regular grade or heavy duty .080 grade stock. The Weather Guard aluminum conduit carrier is wider, at 11 inches across and 121 inches long. Vantech’s CC is a round 6 inch tube 128 inches long with dividers that keep different sizes of conduit apart, and Holman sells an aluminum conduit carrier for its own racks with a 48 inch extension for longer loads.

Length and cross section are the two numbers that matter when comparing conduit carriers. A tube only works if the stock fits inside it end to end, so measure your longest conduit, pipe or trim against the tube length before ordering. Cross section decides how much fits at once, with a wide box holding more than a single round tube, and dividers keeping a mixed load from tangling on the way to the job.

Send us the lengths and sizes you carry most and we quote the carrier that fits, on 603-434-6911 (NH) or 508-754-3030 (MA).

K&W Manufacturing Aluminium Conduit Carrier

PVC Conduit Carriers Built From End Cap Kits

A kit is the other route to conduit carriers, turning a length of PVC pipe you supply into a closed tube with a door at one end. The System One A306 kit is a cast aluminum door and end cap for 4 or 6 inch PVC pipe, held by 1/4 by 1 inch mounting bands, and it can mount over or under a crossmember. Vantech sells an aluminum hatch and cap pair, part CCP, that makes 6 inch PVC into a lockable conduit tube, and Holman offers a PVC conduit carrier kit for its racks with the 6 inch pipe sold separately.

Kits suit crews who already keep PVC on hand or want a tube cut to an exact length, since the pipe sets the length of the finished carrier. Mounted under the crossmember, a kit leaves the tops of the bars clear for ladders, while mounted over it the tube rides beside them. Prime Design also lists conduit carriers among the accessories for its ErgoRack, and Weather Guard offers an optional cross member on its EZGLIDE2 that takes a conduit carrier, so drop-down rack owners have a route too.

Over 50 years of outfitting contractors’ vehicles means we can tell you whether a ready-made tube or a kit suits the stock your crew carries.

System One A306 – Conduit Carrier End Cap Kit

Mounting Conduit Carriers on Van and Truck Rack Crossbars

We mount conduit carriers on the crossbars of a van or truck rack, usually to one side so the rest of the bars stay free for ladders. Several of our listings sit in more than one store category, since the Vantech CC and the System One A306 are filed under truck racks as well as vans. System One van roof racks use T-slot crossmembers that let accessories move between positions, Vantech makes a 6 inch hatch and cap for its H1 Series, and the Holman aluminum carrier and PVC kit are built for Holman racks, so they pair most simply with a Holman roof setup.

Weight counts toward the roof rating. A full tube of copper or steel pipe adds to the load the rack and the van roof carry, and Vantech’s 125 lb rating per mount covers everything on the van, a loaded carrier included. Band or strap the tube at every crossbar it crosses, keep the door latched in transit, and check the mounts after the first few miles of a heavy run, because loads shift and settle in the first stretch of driving.

We install conduit carriers along with the racks they ride on, setting the bands and brackets so the tube stays put over a long run.

Vantech CC – 6” Diameter x 128”L with dividers

Conduit Carriers Within a Full Van Roof Plan

A carrier is one piece of the roof, sharing crossbars with ladders and drawing on the same payload as the shelving inside. Planning it with the rest of the van upfitting work, and with the van ladder racks it mounts to, keeps the bars spaced for both. Our Vantech rack accessories and K&W tool boxes pages list each maker’s carrier beside its other gear.

To compare carriers and racks from every maker, browse our truck and van equipment brands hub.

Vantech CC – 6” Diameter x 128”L with dividers

Conduit Carriers Sized, Supplied and Installed

Nation Wide Ladder supplies and installs conduit carriers from K&W, Weather Guard, Vantech, Holman and System One, matching the tube to your stock and your rack. Our delivery trucks reach Vermont, Rhode Island, Connecticut, Massachusetts and New Hampshire door to door, and regular weekly deliveries from New Hampshire bring the same gear to Maine.

Conduit Carriers FAQs

What sizes do aluminum conduit carriers come in?

The K&W CC88126 is 8 by 8 by 126 inches, the Weather Guard carrier is 11 inches wide by 121 inches long, and the Vantech CC is a 6 inch round tube 128 inches long with dividers.

Are conduit carriers available as PVC kits?

Yes. System One, Vantech and Holman sell door and end cap kits that turn PVC pipe into a carrier, with the pipe supplied separately. The System One kit takes 4 or 6 inch pipe.

Can conduit carriers lock?

Vantech describes its hatch and cap pair as making 6 inch PVC into a lockable conduit carrier. Ask us about locking on the other models.

Which roof racks take conduit carriers?

Holman builds carriers for its own racks, Vantech makes a hatch and cap for the H1 Series, the System One kit mounts over or under a crossmember, and Weather Guard offers an EZGLIDE2 cross member for a carrier.

Do conduit carriers count against the roof load rating?

Yes. The carrier and everything inside it add to the load on the rack and the van roof, so include a full tube when you check the rating.

Do you install conduit carriers?

Yes. We install carriers with the racks they mount to, and our own trucks deliver across New England.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder