RGC Reimann & Georger range

RGC Ladder Hoists, With Classic and Pro 200 and 400 Pound Platform Lifts, 28 and 44 Foot Tracks, Gas and Electric Drives

Material platform lifts that run up an inclined aluminum track to the roof edge, rated for 200 or 400 pounds and powered by a Briggs & Stratton, Honda or electric drive.

Hauling bundles up a ladder by hand wears a crew down by noon, and Nation Wide Ladder puts that work on a machine with RGC ladder hoists, configured by our team for your roof heights and loads. We supply the Classic and Pro platform hoists in 200 and 400 pound capacities, each in 28 and 44 foot setups with a Briggs & Stratton gas engine, a Honda gas engine or an electric drive.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Who Runs RGC Ladder Hoists and What They Lift

Residential roofers are the main users, sending shingle bundles, underlayment and ridge cap to the eave while the crew stays on the deck. Siding, gutter and solar crews use the same machines for panels and sheet goods, and RGC describes its platform hoists as a way to cut worker fatigue and injury risk by moving heavy loads with less effort. RGC notes the hoists are also known as laddervators or tranzporters.

The machine is simple, and it borrows its name from the ladder it resembles. A drive unit at the bottom of a ladder-style aluminum track winds a wire rope that pulls a platform up the track to the roof edge, and the operator controls the climb and descent from the side. RGC mounts the drive higher on the track for clearance over shrubs and on steeper ground. Because the track leans on the eave like an extension ladder, it sets up where a ladder would, on a driveway, lawn or patio, without blocking the whole side of the house. RGC ladder hoists lift material only, and RGC is clear that nobody should climb or ride the track.

Our own trucks deliver door to door across New England, so a hoist and its track can arrive at the first job rather than at your shop.

Reimann & Georger Corp. – Classic Platform Hoist 200lb. Capacity

Classic and Pro RGC Ladder Hoists in 200 and 400 Pound Capacities

Classic 200. The RGC Classic platform hoist, 200 pound capacity runs at 220 feet per minute on a 17 inch wide track with a 17 by 18 inch platform. It suits crews moving shingle bundles quickly.

Classic 400. The 400 pound Classic lifts at 110 feet per minute on a 24 inch track with a 24 by 24 inch platform, trading speed for twice the payload and a deck that takes larger material.

Pro 200 and Pro 400. We also list the RGC Pro platform hoist, 400 pound capacity and its 200 pound partner, in the same 28 and 44 foot setups and the same three drive choices as the Classic.

Every one of these RGC ladder hoists comes as a 28 foot or 44 foot package with a Briggs & Stratton gas engine, a Honda gas engine or an electric motor. RGC lists 4 horsepower for both gas engines and 1.5 horsepower for the electric motor on the Classic drives. The Classic design uses dual handle controls, which RGC says lets the operator work away from the load.

Send us your list or call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts, and we will quote the capacity and drive combination that fits.

Reimann & Georger Corp. – Classic Platform Hoist 400lb. Capacity

Track Lengths, Brakes and Safe Setup for RGC Ladder Hoists

RGC builds the 28 foot package from an 8 foot base, two 8 foot tracks and one 4 foot track, and the 44 foot package from the base, four 8 foot tracks and a 4 foot track. Above 28 feet the telescope support is required. Dual anchor points on the 3rd and 5th track sections tie the run to the building, and heavy cast aluminum shoes on the base track help it sit firmly on uneven ground.

On the drive, RGC uses a brake rope design for a controlled descent, with long clutch and brake handles placed within easy reach. Pulleys with polymer sheaves are intended to extend wire rope life and keep the platform moving smoothly, and the large open platform has removable rollers. RGC says the hoists assemble without special tools, but it directs operators to follow the manual for setup and use, and every crew member should know the hoist carries material only.

A practical routine helps. Set the base on firm ground, fix both anchor points before the first lift, keep everyone clear of the track while the platform moves, and stage loads within the rated capacity of the hoist you own. Strike the track in reverse order at the end of the job, and check the wire rope and sheaves before the next ladder setup.

Our team will help you choose the right hoist and track for your roofs, checking eave height, ground conditions and the load you lift most.

Reimann & Georger Corp. – Pro Platform Hoist 200Lb Capacity

RGC Ladder Hoists in a Complete Roof Delivery Plan

The hoist delivers loads to the eave, but someone still has to receive them safely. Roof brackets and planks give a landing spot for bundles, and guardrails or other fall protection cover the edge where the platform arrives.

To pair a hoist with ladders, brackets and edge protection from other manufacturers, compare them in our ladder and truck equipment brands guide.

Reimann & Georger Corp. – Pro Platform Hoist 400Lb. Capacity

Get RGC Ladder Hoists Quoted for Your Roofs

Tell us the roof heights, typical loads and power on site, and we will price RGC ladder hoists to suit. Shop our power ladder and platform hoist store, add track or carriers from our RGC hoist accessories, or return to the RGC platform hoists range.

RGC Ladder Hoists FAQs

Which RGC ladder hoists are fastest?

The 200 pound Classic lifts at 220 feet per minute, twice the 110 feet per minute of the 400 pound Classic.

What heights do RGC ladder hoists come in?

We list 28 and 44 foot setups. RGC requires the telescope support for any height over 28 feet.

Which engines are available on RGC ladder hoists?

Each hoist we list comes with a Briggs & Stratton gas engine, a Honda gas engine or an electric drive. RGC rates the Classic gas engines at 4 horsepower and the electric motor at 1.5 horsepower.

Can I climb the track of an RGC ladder hoist?

No. RGC states the hoist is for lifting material only and the track is not designed for climbing.

How big is the platform on RGC ladder hoists?

RGC lists a 17 by 18 inch platform on the Classic 200 and a 24 by 24 inch platform on the Classic 400, each with removable rollers.

Need help choosing the right RGC Reimann & Georger equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder