Brand spotlight
RGC Platform Hoists From Reimann & Georger, With Classic and Pro Drives, Track Sections, Material Carriers and More
Gas and electric ladder-style material lifts in 200 and 400 pound capacities, set up at 28 or 44 feet, plus the track, telescope support, carriers and guides that adapt one drive to shingles, plywood or solar panels.
Carrying bundles of shingles up a ladder is slow, tiring and risky, and Nation Wide Ladder takes that load off the crew with RGC platform hoists from Reimann & Georger Corp., set up by our team for the roof heights you work. We supply Classic and Pro hoists in 200 and 400 pound capacities, with Briggs & Stratton, Honda or electric drives, plus track sections, the telescope support, plywood and solar panel carriers and the roller angle guide.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
What RGC Platform Hoists Do on a Roofing Job
A platform hoist runs a small powered platform up an inclined track that leans against the building like a ladder, which is why roofers also call it a ladder hoist, a laddervator or a tranzporter. RGC builds these material lifts so one operator at the base can send shingles, plywood or panels to the roof edge while the crew stays on the deck. They lift material only, and RGC warns that the track is never to be climbed.
Two categories organize our RGC platform hoists pages. The ladder hoists page explains the Classic and Pro drives, their 200 and 400 pound ratings and the 28 and 44 foot setups. The accessories page covers the extra track, the telescope support needed past 28 feet and the carriers and guide that let one hoist handle more than shingles. Start with the hoist, then add the parts the load and the roof call for.
RGC Platform Hoists and the Reimann & Georger Story
RGC is a registered trademark of Reimann and Georger Corp., and the company says it has been a leader in roof hoisting equipment for more than half a century. Its hoisting site lists platform hoists, larger swing hoists that it says lift up to a ton, HydraPak hydraulic power units and roofing options such as shinglers and ladder hooks, with sister businesses selling RGC products for marine and tool markets.
Within that range the platform hoist is the workhorse for residential roofing, and RGC calls it a customer favorite for decades. The design keeps the drive off the ground, which gives clearance over shrubs and landscaping, and puts the controls to one side so the operator works away from the load instead of under it. RGC also builds in dual anchor points on the track, cast aluminum shoes at the base for footing on uneven ground and polymer sheaves that are easier on the wire rope. Those details are why RGC platform hoists have stayed a fixture on roofing trailers across New England, where steep pitches and tight lots make carrying material up a ladder especially hard work.
We have served roofers and contractors for over 50 years, and our FAQ notes that power ladders like these reach 44 feet, a height we help crews plan around on every quote.
Classic and Pro Drives, Track and Carriers in Our RGC Platform Hoists Range
Hoists. Our RGC ladder hoists page covers the Classic and Pro platform hoists in 200 and 400 pound capacities. Each is listed in 28 and 44 foot setups with a choice of a Briggs & Stratton gas engine, a Honda gas engine or an electric motor. The RGC Classic platform hoist, 400 pound capacity is the heavier of the Classic pair.
Accessories. The RGC hoist accessories we list include 4 and 8 foot track sections for both capacities, the 0400540 telescope support, the 0400562 7 inch plywood carrier, the 0424030 solar panel carrier and the 0400557 6 foot roller angle guide.
Platform parts. The platform itself is a wearing part on a busy roofing crew. RGC sells the platform and top sheave assembly for each capacity as a replacement, and its Classic platform has an open design with removable rollers, so a damaged deck or worn rollers can be renewed without retiring the drive or the track.
The two capacities are not interchangeable part for part. RGC builds the 400 pound hoist on a 24 inch wide track and the 200 pound hoist on a 17 inch track, so track, carriers and platform assemblies have to match the capacity you own.
Our team checks the capacity, drive and height of the hoist you run before quoting parts, so new track or carriers fit the RGC platform hoists already on your trailer.
Capacities, Lift Speeds and Heights for RGC Platform Hoists
RGC rates the Classic 200 at 200 pounds with a lift speed of 220 feet per minute and a 17 by 18 inch platform. The Classic 400 carries 400 pounds at 110 feet per minute on a 24 by 24 inch platform. Both are offered with a 4 horsepower Briggs & Stratton or Honda gas engine or a 1.5 horsepower electric motor, and RGC says a brake rope gives a controlled descent while long clutch and brake handles keep the operator clear of the load.
Height comes from the track. RGC builds a 28 foot hoist from an 8 foot base, two 8 foot tracks and one 4 foot track, and a 44 foot hoist from the base, four 8 foot tracks and a 4 foot track. Any setup taller than 28 feet needs the telescope support. RGC lists 44 feet as the maximum for every platform model, and states plainly that the hoist is for material only and the track is not for climbing.
Call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts with your eave heights, and we will quote the drive and track length that reach them.
RGC Platform Hoists Beside Ladders, Roof Brackets and Edge Protection
A hoist moves the material, but the crew still climbs a ladder to the roof, stands on roof brackets to lay it and works behind edge protection once the eave is 6 feet or more up. Landing loads safely at the top also means planning where the bundles go once they arrive.
Our ladder and truck equipment brands roundup shows the ladder, bracket and guardrail makers we stock to work next to a hoist.
Choosing RGC Platform Hoists by Load, Height and Power Source
Start with the load. The 200 pound hoists move faster, at 220 feet per minute on the Classic, and suit shingle bundles and lighter material, while the 400 pound hoists move half as fast but lift twice the weight and carry the wider 24 inch track that the roller angle guide is built for. Height comes next, so measure the eave or roof edge and add the length the track needs to lean at a workable angle before choosing between the 28 and 44 foot setups.
Power is the last choice. The gas engines suit sites without reliable power, while the electric motor suits jobs with a steady supply and quieter neighborhoods. RGC says its hoists assemble without special tools and are light to transport, so a two-person crew can set up and strike one in a day’s work. Pick carriers to match what you lift most often, such as the plywood carrier for sheet goods or the solar panel carrier for panel installs.
Platform size matters too. The 17 by 18 inch platform on the Classic 200 handles bundles and boxes, while the 24 by 24 inch platform on the Classic 400 takes bulkier loads and is the base for the gravel hopper RGC builds for that capacity. Crews that split work between shingling and heavier deliveries often run one platform hoist of each size.
Visit our Windham, NH or Worcester, MA showroom for a free consultation, and we will walk through the capacity and drive that suit your crew.
Get RGC Platform Hoists Quoted for Your Crew
When shingles and sheet goods have to reach the roof without a worker carrying them, we quote RGC platform hoists, track and carriers to order and deliver them on our own trucks. Browse the complete RGC Reimann & Georger store range, or send your list through our Request a Quote form.
RGC Platform Hoists FAQs
What is the difference between 200 and 400 pound RGC platform hoists?
On the Classic line, the 200 pound hoist lifts at 220 feet per minute on a 17 inch track, while the 400 pound hoist lifts at 110 feet per minute on a 24 inch track with a larger platform.
How high do RGC platform hoists reach?
RGC lists 44 feet as the maximum. We list 28 and 44 foot setups, and anything over 28 feet needs the telescope support.
Can RGC platform hoists run on electric power?
Yes. The Classic hoists come with a 1.5 horsepower electric motor or a 4 horsepower Briggs & Stratton or Honda gas engine.
Can a worker ride or climb an RGC platform hoist?
No. RGC states the hoist is for lifting material only and the track is not meant for climbing.
Who makes RGC hoists?
RGC is a registered trademark of Reimann and Georger Corp., which says it has led in roof hoisting equipment for more than half a century.
How do I get a price on RGC platform hoists?
We quote every order. Use the Request a Quote form or call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts.
Need help choosing the right RGC Reimann & Georger equipment?
Talk to the team or send us your list and we will put a quote together.








