RGC Reimann & Georger range
RGC Hoist Accessories, With 4 and 8 Foot Track Sections, a Telescope Support, Plywood and Solar Panel Carriers and More
Add-on parts for Classic 200 and 400 pound platform hoists that extend the track past 28 feet, carry sheet goods and solar panels, and guide loads clear of a shallow roof edge.
One platform hoist can do far more than shingles once it has the right parts, and Nation Wide Ladder helps crews expand theirs with RGC hoist accessories, matched by our team to the capacity of the hoist you own. We supply 200 and 400 pound track sections in 4 and 8 foot lengths, the 0400540 telescope support, the 0400562 7 inch plywood carrier, the 0424030 solar panel carrier and the 0400557 6 foot roller angle guide.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Track Sections and the Telescope Support as RGC Hoist Accessories
Track sets how high a hoist reaches, and RGC sells it in sections you can mix and match to the job. We list six. For 200 pound hoists there is a 4 foot section with plates, an 8 foot section with splice plates and an 8 foot section with safety shoes. For 400 pound hoists there is the 0400555 4 foot section with splice plates, the 0400554 8 foot section with splice plates and the 0440088 8 foot section with safety shoes. Sections with safety shoes go at the base, while splice plates join sections further up.
RGC builds the 200 pound track 17 inches wide and the 400 pound track 24 inches wide, so sections only fit the capacity they are rated for. Any run longer than 28 feet needs the 0400540 telescope support, which RGC describes as reinforcement for tracks over 28 feet and up to 44 feet. Order the support with the track rather than after, because the hoist should not be run at the taller height without it.
Our team checks your hoist capacity and current track before quoting RGC hoist accessories, so new sections and supports match the run already on your trailer.
Plywood, Solar Panel and Roller Angle RGC Hoist Accessories
Plywood carrier. The RGC 0400562 7 inch plywood carrier holds sheet goods on edge so they ride up the track instead of balancing flat on the platform. Our listing covers versions for both 400 pound and 200 pound hoists, and RGC calls it a plywood and truss carrier.
Solar panel carrier. The RGC 0424030 solar panel carrier comes with its frame and top sheave and is made for raising and lowering panels. RGC lists it for both the Classic 200 and Classic 400, and our listing offers 200 and 400 pound models.
Roller angle guide. The RGC 0400557 6 foot roller angle guide moves material away from the roof edge on shallow inclines, so bundles land on the deck rather than at the drip edge. RGC makes it for 400 pound hoists only.
RGC also builds hoist accessories we can quote on request, including a gravel hopper for 400 pound hoists, a scaffolding support arm and a track swivel shoe kit. Picking among these accessories comes down to what you lift most. Roofers who sheathe as well as shingle get the most from the plywood carrier, solar installers need the panel carrier, and low-slope work favors the angle guide.
Bring your hoist details to our Windham, NH or Worcester, MA showroom for a free consultation on which carrier suits the material you move.
Matching RGC Hoist Accessories to Your Capacity and Height
Getting hoist accessories right first time saves a second delivery, so we check three things. Capacity is the first. The 200 and 400 pound hoists use different track widths and different carriers and platforms, so start from the rating plate on your hoist. RGC’s own accessory list separates Classic 200 parts, Classic 400 parts and the few that fit both, with the telescope support and solar panel carrier in that shared group and the roller angle guide limited to the 400.
Height is the second. Count the track you have, add the sections the new job needs, and include the telescope support whenever the total passes 28 feet. RGC caps its platform hoists at 44 feet. Note also that a 4 foot section is the usual way to fine-tune length, since RGC’s standard 28 and 44 foot packages each end with one.
Finally, keep the hoist itself in mind when ordering accessories. Older or mixed fleets may carry track from different years, so measure the width and check the part numbers stamped or labelled on each section before ordering replacements, and follow RGC’s manual for how sections join.
Our trucks run regular weekly deliveries from New Hampshire to Maine, so crews in Maine can add track or a carrier between jobs.
RGC Hoist Accessories and the Rest of the Roof Setup
Hoist accessories widen what one machine can lift, but the crew receiving loads still needs footing and edge protection at the top. Roof brackets give bundles a landing place, and guardrails cover the edge where the platform arrives.
For the ladders, brackets and guardrails we carry from other makers, take a look at our ladder and truck equipment brands overview.
Get RGC Hoist Accessories Quoted
Tell us your hoist capacity and the heights and materials ahead, and we will price RGC hoist accessories to match. A photo of the rating plate and the track you already own helps us confirm the fit before anything ships. Shop our power ladder accessories store, review the drives on our RGC ladder hoists page, or return to the RGC platform hoists range.
RGC Hoist Accessories FAQs
When do I need the RGC telescope support?
RGC requires the 0400540 telescope support whenever the track is longer than 28 feet, up to the 44 foot maximum.
Do RGC hoist accessories fit both 200 and 400 pound hoists?
Some do. The telescope support and solar panel carrier fit both Classic capacities, while track and the roller angle guide are capacity-specific, and the guide fits 400 pound hoists only.
What does the RGC roller angle guide do?
The 6 foot guide moves material away from the roof edge on shallow inclines. RGC makes it for 400 pound hoists.
Which RGC track sections go at the base?
Sections with safety shoes go at the bottom of the run, and sections with splice plates join the track further up.
How wide is RGC hoist track?
RGC lists a 17 inch track for 200 pound hoists and a 24 inch track for 400 pound hoists.
Need help choosing the right RGC Reimann & Georger equipment?
Talk to the team or send us your list and we will put a quote together.









