ReechCraft range
ReechCraft PowerPole Accessories, With Climbing Units, Pole Sections, Couplers, Outriggers, V-Braces, Ties and More
Replacement and expansion parts for a PowerPole system, from 6 and 12 foot masts and the drill-driven climbing unit to wall ties, platform supports, a one-person basket and tool-free guardrail posts.
A pole system is only as useful as the accessories that adapt it to each wall, and Nation Wide Ladder helps crews build out their setups with ReechCraft PowerPole accessories, checked for fit by our team. We supply climbing units, PowerLatch assemblies, platform supports, 6 and 12 foot pole sections, couplers, base feet, outriggers, standard and extendable V-braces, standoff and super standoff ties, SpeedRail endrails and midrail posts, and the single-person basket.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
ReechCraft PowerPole Mast, Base and Climbing Unit Parts
The mast is built from 6 and 12 foot sections of high-strength aluminum alloy, each carrying a galvanized steel track that can be replaced if it is damaged. ReechCraft points out the trade-off between them, since 12 foot sections need fewer couplers and make a lighter assembly, while 6 foot sections pack smaller for transport but need more couplers. The 4 foot ReechCraft 4022096 PowerPole coupler joins sections with built-in snap buttons and no tools.
The 10 by 10 inch base foot fits the bottom of the base mast section, with a belted rubber backing and a large area that lowers ground pressure on soil. Two holes let you pin it to the ground or to a larger sill plate where the user manual calls for it. The climbing unit, part 4028334, is the heart of the system, with a gearbox, a drill brace for a 1/2-inch drill, a safety locking lever and an integrated overspeed brake, all rated at 650 pounds.
ReechCraft says replacement parts are available for most models, so worn ReechCraft tracks, couplers or feet can be swapped without retiring the mast. Inspect each section before a job and set up to the ReechCraft operator’s safety manual, which these accessories are designed around.
Our team checks which mast lengths, couplers and climbing units your existing ReechCraft PowerPole accessories need before you order, so the new parts match what is already in the trailer.
ReechCraft PowerPole Outriggers, V-Braces and Standoff Ties for Every Wall
The ReechCraft 4022791 PowerPole outrigger base clamps onto the mast by hand and lets the system work to 24 feet without tying into the structure. Each side has a stabilizer with 8 inches of adjustment for leveling, and the assembly folds for transport.
Two ReechCraft V-brace styles rest the top of the pole against the wall. The standard V-brace works with the outrigger base, slides along the pole while attached and has non-marking bumpers for glass or painted siding. It sets the pole center 33 inches from the wall and includes a 500 pound rated ratchet strap and a wall anchor plate for use above 24 feet. The extendable V-brace adds 18 inches in 2 inch steps, for a total wall distance of 51 inches, and folds flat with the same strap and plate.
ReechCraft standoff ties handle rooflines, and they are the accessories most crews add once the work reaches an eave. The standoff tie fits most pitched roofs, including valleys, and doubles as a wall tie, while the super standoff tie uses extra-long tubes so you can reach the roof. ReechCraft says that with the platform at roof level, its tilt-up setup can then serve as roofline fall protection.
Bring a photo of the eave or a sketch of the wall to our Windham, NH or Worcester, MA showroom for a free consultation on which tie suits it.
Platform Supports, PowerLatch, SpeedRail and the Basket as ReechCraft PowerPole Accessories
The ReechCraft PowerLatch assembly gives the climbing unit a tool-free quick attach with heavy-duty dual safety pins. Platform supports, workbench supports and the basket all connect through it, and removing them leaves a slim climbing unit for transport. The single-sided version suits most work, while the double-sided version carries a platform support on each side or the single-person basket.
The 4022179 platform support is used on twin-mast setups and offers 16 inches of tool-free adjustment for standard stages 12 to 28 inches wide, with a universal platform tie chain included. The 4022756 single-person basket has dual side entry and a 36 by 26 inch working area.
Guarding comes from the ReechCraft SpeedRail accessories, each sold as a two-pack. Endrails fasten to the climbing unit through the PowerLatch and work with any stage in a PowerPole setup. Midrail posts attach to the workbench and chain to the walkboard, spaced 8 feet apart or closer, and take wooden 2x4s as the midrail and toerail.
Send us your list of ReechCraft PowerPole accessories and we will return a single quote, by phone at 603-434-6911 or 508-754-3030 or through the website.
Planning ReechCraft PowerPole Accessories Around the Whole Job Site
ReechCraft accessories decide how far one PowerPole kit can stretch, but the climb to the stage, the walkboard itself and any first-floor staging on uneven ground come from other products. Thinking about the whole wall at once avoids buying two ties when a longer stage would do.
For the ladders, planks and other gear that work around a pole system, you can browse the makers in our ladder and truck equipment brands directory.
Order ReechCraft PowerPole Accessories From Our Team
Whether you are replacing a worn coupler or adding a second climbing unit, we quote ReechCraft PowerPole accessories to order and deliver them across New England. Browse our PowerPole accessories store, see how parts assemble in our PowerPole scaffolding systems, or return to the ReechCraft brand range.
ReechCraft PowerPole Accessories FAQs
Should I buy 6 or 12 foot ReechCraft PowerPole sections?
Twelve foot sections need fewer couplers and make a lighter mast, while 6 foot sections pack smaller for transport. ReechCraft says any combination of the two can be used.
Which ReechCraft PowerPole accessories let the system stand without wall ties?
The outrigger base with a V-brace gives a 24 foot work height without tying into the structure.
What is the difference between the standard and extendable PowerPole V-brace?
The standard V-brace sets the pole center 33 inches from the wall. The extendable version adds 18 inches in 2 inch steps for a wall distance of up to 51 inches.
Do I need a single or double-sided PowerLatch?
Single-sided suits most work. Choose the double-sided version to carry a platform support on each side of the climbing unit or to use the single-person basket.
How far apart do SpeedRail midrail posts go?
ReechCraft says 8 feet apart or closer, with wooden 2x4s mounted to the posts to form the midrail and toerail.
Need help choosing the right ReechCraft equipment?
Talk to the team or send us your list and we will put a quote together.










