Holman Van Racks
Holman Van Rack Mount Kits for Ladder, Cargo and Crossbar Racks, Full Length Rails, Truck Cap Plates and More
Model-specific hardware that attaches Holman ladder, cargo and crossbar racks to GM, Nissan, Ford, Ram and Mercedes-Benz vans, plus fittings for truck caps and service bodies.
Roof equipment is only as secure as the hardware holding it to the vehicle, so we fit Holman van rack mount kits matched to both your van and its rack. At Nation Wide Ladder we list a Holman mount kit for each pairing of van and ladder racks, drop down or Clamp & Lock, plus versions for cargo and crossbar racks, HD aluminum and full length rail systems for tall vans, and hardware for covered service bodies, open service bodies and truck caps. We install each one alongside the rack it carries.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Why Each Holman Van Rack Needs Its Own Mount Kit
Vans differ in roof shape, rain gutters and mounting points, and racks differ in how they carry and release a load. A mount kit bridges the two. Holman lists each kit by vehicle and by the style of racks it carries, so a GM van with drop down ladder racks takes a different kit from the same van fitted with Clamp & Lock or cargo racks.
That is why the kit matters as much as the racks themselves. The wrong hardware can leave a van rack off center, at the wrong height or held by parts never meant for that roof, while the correct Holman kit puts the load where Holman intended it to go.
Fleet managers, upfitters and contractors replacing a van all run into this question, and so does anyone adding a second style of racks to a vehicle that already carries one. In each case, the kit is chosen after the van and its racks are settled.
Our team matches the mount kit to your exact van, checking model, roof height and the racks you plan to carry before anything is ordered.
Holman Ladder Rack Mount Kits for GM, NV and Transit Vans
Drop down and Clamp & Lock ladder racks each take their own Holman hardware. For drop down racks there are versions for GM vans (409CD), the Nissan NV (409ND) and the Ford Transit (409TD). For Clamp & Lock racks there are matching versions for GM vans (408CC), the NV (408NC) and the Transit (408TC). Because these parts look alike on paper, we confirm the part number against your van and rack before ordering.
Other models have their own van rack hardware. The Mercedes-Benz Metris has a dedicated kit (4081M), the ProMaster has one for low and high roof vans (4081P), and the Sprinter in standard and high roof has an HD aluminum kit (4081S). The Transit also takes a separate Holman kit for crossbar racks (4A82T). When a fleet changes van models, ask us whether the existing racks can move over with a new kit.
Together these kits support the full line of Holman van racks, from ladder racks to crossbar racks, across the vans most trades drive.
Send us the van and the part number of the rack you want, and we will quote both with the right kit, at 603-434-6911 in NH or 508-754-3030 in MA.
Holman Cargo Rack Hardware and Full Length Rail Systems
Cargo racks in the 40890 and 8016A models use their own Holman hardware, with versions for GM vans with rain gutters (4089C), the ProMaster (4089P), and the Transit, Sprinter and Nissan NV (4089T). The Metris takes a separate cargo rack mount kit (8006M).
For tall vans, Holman lists an HD aluminum kit (40818) titled for the Sprinter, ProMaster, Transit and NV, and the Holman aluminum full length rail kit (40918) for the same four models. A full length rail runs along the roof rather than holding the rack at a few points, which spreads the mounting along the van and gives more choice in where bars and mechanisms sit.
Aluminum keeps the added weight on the roof modest, which matters on a van that already carries shelving, tools and stock. That saving adds up across a Holman fleet. Ask us whether a rail or a point-mount kit better suits the racks you plan to add later.
We install rails, kits and the van rack in the same visit, setting bar spacing and alignment before the vehicle goes back to work.
Holman Van Rack Planning Inside and Out
Roof racks and their hardware cover the top of the van, while most working vans also need shelving inside. Planning both at once lets racks, mechanisms and shelves sit where side and rear doors stay clear.
For other manufacturers’ racks and gear, see the full list in our ladder and truck equipment brands hub.
Holman Mount Kits for Truck Caps and Service Bodies
The same Holman racks work on trucks. For pickups with ARE DCU or other commercial caps, Holman offers a truck cap kit (408SC) for Clamp & Lock and drop down ladder racks, along with a pack of eight slider plates with studs (408GC) that help mount Holman racks to ARE fiberglass cap mounting rails. Check which rails your cap has before ordering plates.
Service bodies have three options. Covered service bodies take one Holman kit for drop down and Clamp & Lock ladder racks (4A959) and another for Holman cargo racks (4089K), while open service bodies take a kit for drop down and Clamp & Lock ladder racks (40960).
Care is simple but worth doing. Check fasteners after the first few weeks of use and every few months after that, watch for corrosion where hardware meets the roof or rail, and recheck the hardware on the van or truck after any heavy load or hard impact. A rattle, or a rack that shifts under load, points to loose hardware.
Customers in Maine can plan van rack and mount kit orders around our regular weekly deliveries from New Hampshire.
Order Holman Van Rack Mount Kits
Holman van rack mount kits keep your racks secure on the vehicle they were meant for, and you can talk through rack and kit choices during a free consultation at our Windham NH or Worcester MA showroom. Browse Holman products in our store or read our Holman overview before you ask for a quote.
Holman Van Rack Mount Kits FAQs
Do I need a separate Holman mount kit for each van?
Yes. Holman lists each kit by vehicle and by the style of racks it carries, so the van model and the racks you choose both decide the kit.
Which Holman van rack mount kits fit the Ford Transit?
We list 409TD for drop down racks, 408TC for Clamp & Lock racks, 4A82T for crossbar racks and 4089T for 40890 and 8016A cargo racks, plus the 40818 HD aluminum kit and the 40918 full length rail.
Is there Holman hardware for fiberglass truck caps?
Yes. The 408GC pack of eight slider plates with studs helps mount Holman racks to ARE fiberglass cap mounting rails, and the 408SC kit fits ARE DCU and other commercial caps.
Which Holman van rack hardware fits service bodies?
Covered service bodies take 4A959 for ladder racks and 4089K for cargo racks, and open service bodies take 40960 for ladder racks.
Do you install Holman van rack mount kits?
Yes. We provide installation for Holman products, including the rack and its kit.
Need help choosing the right Holman equipment?
Talk to the team or send us your list and we will put a quote together.











