Aluminum Ladders

8 ft Aluminum Ladders for Taller Walls and Repaints in Type I and IA Steps With ProTop Trays and More

Wall and ceiling reach at 8 ft, open depth and weight on the Louisville AS2108 and AS3008, 250 against 300 pound ratings, and where an aluminum rail hands over to fiberglass.

Repaint crews, property managers and homeowners with tall rooms turn to 8 ft aluminum ladders when a 6 leaves the top of the wall out of reach. Nation Wide Ladder quotes the two step models we list at this height, the Type I Louisville AS2108 and the Type IA AS3008, both standard single-sided steps with a ProTop and a molded pail shelf, and we help you weigh footprint, weight and rating against the work.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Higher Walls and Ceilings Inside an 8 ft Aluminum Reach

Louisville lists 12 feet 3 inches of maximum reach and a top standing height of 68 inches for both 8 ft models, figured for a climber 5 feet 7 inches tall reaching 12 inches overhead, and Werner’s reach guide gives an 8 ft stepladder an average reach of 12 feet. That suits rooms with taller ceilings, vaulted living rooms, office and retail repaints, porch ceilings and garage walls. Where a 6 leaves the painter reaching from the top step, the 8 puts the same ceiling line within reach from a permitted step, which is the main reason crews add one to the van.

The 8 has seven steps, two more than the 6, and that extra height changes the setup. Werner sets the highest standing level two steps under the top cap, and OSHA bars standing on the top or the top step, so plan the cut-in line at the ceiling from the third step down rather than the label height. Louisville gives both models a closed height of 94.4 inches, which is worth measuring against a van floor or a storage wall. In a stairwell, stand the 8 on a level landing rather than on the treads and work the upper wall from there.

Our showrooms in Windham and Worcester offer free in-person consultations, so you can open both 8 ft ladders and stand on them before choosing.

Louisville AS1000 Series – Type IA Aluminum Step Ladder

Footprint and Weight Between the Two 8 ft Aluminum Models

The pair look alike but open differently. Louisville lists an open depth of about 52 inches for the AS2108 and about 46 inches for the AS3008 so the AS3008 takes up less floor in a hallway or between furniture. Weight is close, with the AS2108 at 22 pounds and the AS3008 at 23. Louisville gives both 8 ft models a closed width of about 23 inches and the same 7 inch closed depth, so a pair stacks neatly against a garage wall.

Ratings separate them more. The AS2108 is a lightweight Type I ladder rated for 250 pounds, and the AS3008 is Type IA for 300 pounds. OSHA counts the climber, tools and material together, so a painter with a loaded tray, a gallon and a brush belt should add it up before choosing the lighter 8. Both carry a ProTop with a magnet and multiple tool slots, a molded pail shelf, steel gusset bracing and angled aluminum feet with slip-resistant rubber, and Louisville calls both ideal for painting.

Send us a list of rooms and climbers, or call 603-434-6911 in NH or 508-754-3030 in MA, and we quote each 8 against the load it will carry.

Louisville AS2100 Series – Type I Aluminum Step Ladder

Where 8 ft Aluminum Rails Suit the Job and When Fiberglass Takes Over

Aluminum suits painting, drywall finishing and general maintenance away from power, and Louisville marks both 8 ft models as not safe around electricity. Commercial ceilings at this height often hide lighting circuits and junction boxes, and OSHA requires nonconductive side rails wherever a ladder could contact exposed energized equipment, so a crew that also changes fixtures should look at our 8 ft fiberglass builds as well.

Setup comes first on any tall step. OSHA requires a metal spreader or locking device to hold it open, so lock both spreaders fully, set all four feet on firm, level floor and keep the ladder clear of doors unless they are locked or guarded. Face the ladder as you climb with three points of contact, and move it rather than stretching to reach the last stretch of wall. Check the rails, steps, spreaders and feet before each climb, and retire any 8 ft aluminum step with a bent rail, cracked step or loose rivet, since height magnifies small damage.

Our own trucks deliver door to door across New England, so a repaint crew can have a set of 8 ft ladders brought to the job.

Louisville AS3000 Series – Type IA Aluminum Step Ladder

An 8 ft Aluminum Step in a Repaint Crew’s Kit

Many repaint crews run a 6 for standard rooms, an 8 for taller walls and an extension ladder for exterior trim. The 8 ft step ladders across makers compare both rail materials, and our aluminum ladder lineup runs from 6 ft aluminum steps to 10 ft aluminum models.

Van racks and shelving from the other makers we stock are easy to compare in our ladder and truck equipment brands hub.

Ordering 8 ft Aluminum Ladders for Repaints and Tall Rooms

We quote 8 ft aluminum ladders from the Louisville AS2100 and AS3000 series by open depth, weight and rating, so each crew gets a ladder that fits its rooms. Send us the rooms, the ceiling heights and the climbers, and we will pair each 8 ft aluminum model with the space it has to open in. Nation Wide Ladder delivers to New Hampshire, Massachusetts, Connecticut, Rhode Island, Vermont and Maine, with shipping anywhere in the US.

8 Ft Aluminum Ladders FAQs

Which 8 ft aluminum ladders do you list?

The Louisville AS2108, rated Type I for 250 pounds, and the AS3008, rated Type IA for 300 pounds.

How high can I reach on these 8 ft ladders?

Louisville lists 12 feet 3 inches of maximum reach and a 68 inch top standing height for both models.

How much floor do open 8 ft ladders take?

Louisville lists an open depth of about 52 inches for the AS2108 and about 46 inches for the AS3008.

What do 8 ft aluminum ladders weigh?

Louisville lists the AS2108 at 22 pounds and the AS3008 at 23 pounds.

Are these 8 ft ladders safe near electricity?

No. Louisville marks both as not safe around electricity, so use fiberglass for work near live circuits.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder