Aluminum Ladders

10 ft Aluminum Ladders for High Walls and Ceilings in Type I and IA Steps, Channel Rail and Painter Models and More

High-room reach at 10 ft, three Louisville series from the channel-rail AS1010 to the painter AS2110 and AS3010, closed length, weight and the rating each one carries.

Two-storey foyers, church halls and tall retail walls are where painters and maintenance crews put 10 ft aluminum ladders to work, away from live circuits and with weight kept down. Nation Wide Ladder quotes all three step models we list at this height, the Type IA Louisville AS1010 with full channel rails and the painter-style Type I AS2110 and Type IA AS3010 with ProTops and pail shelves, and we match each to the job.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Tall Rooms and Foyers Within a 10 ft Aluminum Reach

Louisville lists 14 feet 2 inches of maximum reach and a top standing height of 91 inches for its 10 ft painter models, figured for a 5 foot 7 inch climber reaching 12 inches up, and Werner’s reach guide gives a 10 ft stepladder an average reach of 14 feet. That brings two-storey foyer walls, church and function halls, high retail walls and warehouse offices within reach. Louisville lists both painter 10 ft models with an open width of about 26 inches, so check the spread in narrow halls and between pews or display racks.

On a 10 with nine steps and the top standing level at 91 inches, setup becomes the main task. Werner keeps the highest standing level two steps under the top cap, and OSHA bars standing on the top or the top step and requires a metal spreader or lock holding the ladder open. Open both spreaders fully, set the feet on firm, level floor and move the 10 rather than leaning out toward the far corner of a wall.

Our team helps you select between the three 10 ft ladders by asking about the rooms, the climbers and the load each will carry.

Louisville AS1000 Series – Type IA Aluminum Step Ladder

Channel Rails and Painter Tops Across Three 10 ft Aluminum Series

The Louisville AS1010 is the plain workhorse, rated Type IA for 300 pounds, with full channel rails, heavy gauge steel hinges, double riveted construction, spreader brace reinforcement plates and slip-resistant feet. Our store lists the AS1000 series in a 16 foot size as well, for rooms taller still.

The painter models carry more on top. The AS2110 is a lightweight Type I ladder rated for 250 pounds at 27 pounds, and the AS3010 is Type IA for 300 pounds at 28. Both have a ProTop with a magnet and multiple tool slots, a molded pail shelf, steel gusset bracing and angled aluminum feet with slip-resistant rubber, and Louisville calls both ideal for painting. OSHA counts the climber, tools and material together, so a painter with a loaded tray and gallon should check the AS2110 total.

Louisville lists an open depth of about 64 inches for the AS2110 and about 58 inches for the AS3010, so the AS3010 needs less floor. The AS1010 open depth is not listed on our store page, so we confirm it before quoting a 10 ft aluminum step for a tight hall or a narrow office.

We install truck and van ladder racks as well as selling them, so a 10 and the rack that carries it arrive as one job.

Louisville AS2100 Series – Type I Aluminum Step Ladder

Closed Length, Transport and the Electrical Limit on 10 ft Aluminum Rails

Louisville gives its 10 ft painter ladders a closed height of 118.4 inches, close to ten feet, so the ladder rides on a roof rack or in a long vehicle and two people make a stairwell carry easier. At 27 and 28 pounds, either painter 10 stays manageable for one person on open floor. Measure the rack on the van or truck, the turn at the top of each stairwell and the doorways into the room before ordering a set of 10 ft aluminum steps, since a ladder close to ten feet long needs a planned route. Keep the 10 off wet or uneven floors, and clear of doorways unless the door is locked or guarded.

Aluminum conducts, and Louisville marks these 10 ft ladders as not safe around electricity. High ceilings carry lighting circuits, and OSHA requires nonconductive side rails wherever a ladder could contact exposed energized equipment, so a crew that also relamps or rewires should add one of our 10 ft fiberglass models to the order.

Regular weekly deliveries run from New Hampshire to Maine, so an order of 10 ft ladders for a Maine job arrives on our own trucks.

Louisville AS3000 Series – Type IA Aluminum Step Ladder

A 10 ft Aluminum Step Among Taller Painting Gear

At this height a painter’s kit often adds an extension ladder for the outside of the building and staging or a rolling scaffold for long walls. The 10 ft step comparison across makers sets aluminum beside fiberglass, and our aluminum ladder best sellers include 8 ft aluminum models for rooms a little lower.

If staging and racks are part of the plan, you can weigh other makers in our ladder and truck equipment brands hub.

Quotes on 10 ft Aluminum Ladders for High Walls and Halls

Nation Wide Ladder quotes 10 ft aluminum ladders from the Louisville AS1000, AS2100 and AS3000 series by rating, weight and floor space, so the ladder suits the room and the climber. Send the wall heights, room widths and climbers, and our team will set the AS1010, AS2110 or AS3010 against each job. Call 603-434-6911 or 508-754-3030, and our own trucks reach New Hampshire, Massachusetts, Connecticut, Rhode Island, Vermont and Maine.

10 Ft Aluminum Ladders FAQs

Which 10 ft aluminum ladders do you list?

The Louisville AS1010 and AS3010, rated Type IA for 300 pounds, and the AS2110, rated Type I for 250 pounds.

How high can I reach on these 10 ft ladders?

Louisville lists 14 feet 2 inches of maximum reach and a 91 inch top standing height for its AS2110 and AS3010.

How long are 10 ft painter ladders when folded?

Louisville gives the AS2110 and AS3010 a closed height of 118.4 inches.

What do 10 ft aluminum ladders weigh?

Louisville lists the AS2110 at 27 pounds and the AS3010 at 28 pounds.

Is there a taller aluminum step than the 10?

Yes. Our store lists the Louisville AS1000 series in a 16 foot size, the AS1016, rated Type IA.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder