TracRac Truck Racks
TracRac Utility Rack, In Short and Tall Versions With Sliding Base Tracks, ARC Cleats, Load Stops and More
A 1,250 lb sliding overhead system for service body trucks, the short and tall heights and weights, built-in tie-down features, and the knobs, tie-downs, toolbox kit, track and cantilever that extend it.
We fit the TracRac Utility Rack to service body and utility trucks that need ladders and conduit carried overhead without blocking the compartments and work area on the body. Nation Wide Ladder lists the short 42101XT, helps you choose between the short and tall versions, and installs the system with the tie-downs, locking knobs, toolbox kit or cantilever extension your truck calls for.

- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Service Body Trucks and the Case for a TracRac Utility Rack
A utility body puts compartments along both sides of the truck, which leaves pickup racks that clamp to a bed with nothing to grip. Thule built the TracRac Utility Rack for that layout, with crossbars that ride on base tracks across the body and slide to suit the cargo. Electricians, plumbers, HVAC techs and service crews use it to carry extension ladders, conduit, pipe and long stock above the compartments, which keeps the tools inside them reachable at every stop.
Thule describes this TracRac as designed to get the most carrying capacity out of a service body truck, and rates it at 1,250 pounds when properly installed with weight spread evenly. That matches the sliding SR made for pickups, so a mixed fleet of pickups and service bodies can run TracRac crossbars with the same rating and much of the same hardware. The sliding design also means the crossbars can be repositioned for a short ladder one day and full-length pipe the next, and the system comes off the tracks when the truck needs the space for something else.
Our team checks your body make, length and compartment layout before we quote, so the TracRac Utility Rack suits the truck it goes on.
TracRac Utility Rack Short and Tall Versions Compared on Height and Weight
Thule builds the system in two heights. The short TracRac Utility Rack we list, the 42101XT, weighs 57 pounds and measures 69.5 by 16 by 16.5 inches. The tall 42102XT shares the 69.5 inch length and 16 inch depth but stands 21.5 inches high and weighs 59 pounds. Both carry the same 1,250 pound rating, both come in silver or black, and Thule lists the United States as the country of origin.
Height is the deciding factor. The short version keeps the load lower, which helps with garage and drive-through clearance. The tall version lifts the crossbars higher above the body, which helps where roof-mounted equipment, raised compartment lids or a toolbox would otherwise sit too close to the load. Both share the same built-in features, including corrosion-resistant aluminum, load stops that adjust across the full width of the body, aluminum ARC cleats for extra tie-down points, T-track and integrated wind deflectors that cut noise and drag. Measure the body and anything mounted on it before choosing.
Our Windham, NH and Worcester, MA showrooms offer free in-person consultations, where you can compare the short and tall versions with us.
Accessories That Extend a TracRac Utility Rack, From Tie-Downs to Cantilevers
Thule offers a short list of add-ons for this system. Base rail tie-downs come as a pair and add anchor points on the tracks, and Thule lists them for the TracRac SR and Utility models only. Locking TracKnobs, also a pair, secure the crossbars so they cannot be moved or removed while the truck is parked on a job site. A TracRac toolbox mount kit places a box under the bars, and a 4 foot Thule track adds extra mounting length.
For material longer than the body, the TracRac cantilever extension adds 32 inches of carrying length and fits this TracRac along with the TracOne, Pro 2 and SR. It comes in a compact size with a 65 inch crossbar and a full-size version at 69.5 inches, so match the extension to the 69.5 inch crossbars on this system. Thule supplies installation instructions by vehicle and offers spare parts, so worn components can be replaced without changing the whole setup. Each accessory is a separate line on the quote, so the system can start bare and gain parts as the work changes.
Our truck and van department installs the TracRac Utility Rack with its tracks and accessories, so the whole system goes on your service body in one visit.
How a TracRac Utility System Fits a Fully Built Service Truck
A service body is already packed with compartments, and often a transfer tank, drawers or a crane, so the overhead rack is the last piece of a crowded plan. Choosing the rack with the ladders it will carry and the equipment around it keeps everything clear of everything else. For fleets running pickups and service bodies side by side, TracRac covers both truck types, so drivers work with the same stops and cleats on every vehicle.
For a look at the other rack and ladder makers we stock beside Thule, visit our ladder and truck equipment brands hub.
Order a TracRac Utility Rack for Your Service Body
For a service truck that carries ladders and pipe above its compartments, Nation Wide Ladder quotes and installs the TracRac Utility Rack in the height and setup your body needs, with delivery across New England. Compare it with the pickup models on our TracRac truck racks overview, read the TracRac by Thule brand page, or browse Thule racks in our store.
TracRac Utility Rack FAQs
How much can a TracRac Utility Rack carry?
Thule rates it to 1,250 pounds when properly installed with weight spread evenly, though your truck's own limits may be lower.
What is the difference between the short and tall TracRac Utility Rack?
Height. Thule lists the short 42101XT at 16.5 inches high and 57 pounds, and the tall 42102XT at 21.5 inches and 59 pounds.
Does the TracRac Utility Rack slide?
Yes. The crossbars slide along base tracks to suit the load and come off when not needed.
Can the TracRac Utility Rack be locked?
Yes. Thule's Locking TracKnobs, sold as a pair, work with this TracRac and the SR only.
Does a cantilever extension fit the TracRac Utility Rack?
Yes. Thule lists the Utility model among the racks that take the TracRac cantilever extension, which adds 32 inches.
Where is the TracRac Utility Rack made?
Thule lists the United States as the country of origin.
Need help choosing the right TracRac by Thule equipment?
Talk to the team or send us your list and we will put a quote together.


