K&W Manufacturing range
K&W Specialty Boxes, From a Notched Trailer Tongue Box to an Under-Tonneau Box, Tote Boxes and More
The KWTB3421N tongue box, the KWUT47-2DT for beds with a tonneau cover and 24 and 36 inch tote boxes, with dimensions, latches, seals and how to measure for each.
Some storage problems sit outside the usual truck box shapes, and Nation Wide Ladder sizes K&W specialty boxes to the trailer, covered bed or job that needs them. We list the KWTB3421N Notched Series tongue box for a trailer A-frame, the KWUT47-2DT made to fit under tonneau covers, and K&W tote boxes in 24 and 36 inch lengths, finished in bright aluminum or black.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Where K&W Specialty Boxes Solve a Storage Problem
The three K&W specialty box types each start from a place where a standard truck box will not go. A landscaper or equipment hauler often needs storage on the trailer, not the truck, for chains, straps, fuel cans and the tools that travel with the machine. The tongue of the trailer, ahead of the deck, is open space that a box shaped to the A-frame can use without taking room from the load.
A truck with a tonneau cover has a different issue. Rail mounted boxes and crossovers sit where the cover seals, so the usual answer is a box that fits inside the bed and under the cover. The KWUT47-2DT is a K&W specialty box built for that space. Tote boxes solve a third need, small secure storage that can move. They suit a parts kit that rides in a van, a box bolted inside a larger compartment or a dedicated case for one trade’s fittings.
Each one works alongside a full truck box, adding storage in a spot the main box can’t reach, and many trucks and trailers end up running one beside a crossover or chest.
Our team helps you select the right products for your vehicle and trailer, starting with where the K&W specialty box will sit.
The K&W KWTB3421N Notched Series Specialty Tongue Box
The K&W KWTB3421N tongue box is listed at 16 inches wide at the front, 34 inches wide at the back, 18.25 inches high and 19 inches deep. That tapered footprint follows the V shape of a trailer’s A-frame, wide where the rails spread toward the deck and narrow where they meet at the coupler, so the box sits on the tongue without hanging over the frame.
K&W calls it the Notched Series. Before ordering, measure the tongue itself. Check the width between the frame rails at the front and back of where the specialty box will sit, the depth available between the coupler and the front of the deck, and the clearance to anything mounted there, such as a jack, a battery box or a propane bracket. Then compare those numbers with the 16 by 34 by 19 inch footprint. The box also needs room to open with the trailer hitched, so check the swing of the lid against the truck’s tailgate in a tight turn.
We install truck and trailer equipment, so our team can mount a K&W specialty tongue box on your trailer frame rather than leaving the drilling to you.
The K&W KWUT47-2DT Specialty Box for Beds With a Tonneau Cover
The K&W KWUT47-2DT measures 47.5 inches long, 16.5 inches wide and 18.5 inches high, and K&W designed it to fit under tonneau covers. Carry handles let it come out of the bed when the space is needed for something else, and automotive grade gas lifts hold the lid open while you work. Stainless steel latches and a durable weather seal keep the contents secure and dry.
Fit comes down to height and length. Measure from the bed floor to the underside of the closed cover, including any cover bows or rails, and confirm it clears the 18.5 inch box with room for the lid. Then measure the floor across the bed to make sure 47.5 inches of length fits where you plan to set it, usually against the front wall. Because this K&W specialty box is portable rather than bolted to the rails, it also suits a truck that changes covers or switches between work and family use.
Our own trucks deliver door to door across New England, so the KWUT47-2DT can arrive at your shop ready to set in the bed.
K&W Specialty Boxes Within a Full Upfit
Specialty storage usually comes after the main pieces of an upfit are chosen, such as the rack, the cover, the trailer and the primary truck box. Seeing those pieces together shows where a tongue box, an under-cover box or a tote fills a gap instead of blocking something else.
For the racks, covers and ladders that shape that upfit, compare the makers we supply in our ladder and truck equipment brands hub.
K&W Tote Boxes in Two Specialty Sizes
K&W tote boxes come in two sizes, 12 by 12 by 24 inches and 12 by 12 by 36 inches, in bright aluminum or black. The square 12 inch section and the two lengths make them easy to fit into a gap that larger boxes leave, such as the space beside a chest, a corner of a van floor or a shelf in a service body compartment.
Use the 24 inch tote box for a single kit, such as fittings, fasteners or a meter and leads, and the 36 inch model for longer items like levels, bits and extension bars. Matching the tote’s finish to the main truck box keeps the setup looking consistent. Since both sizes share the same cross section, two totes side by side take the same width as one, which helps when planning a row of them on a shelf. A tote that rides loose in a bed or van should be strapped or blocked in place, so plan an anchor point when you choose where it goes.
Visit our Windham, NH or Worcester, MA showroom for a free consultation, and compare tote sizes against the gear your crew carries.
Order K&W Specialty Boxes for Your Truck or Trailer
Send us your trailer tongue, cover or space measurements and we will quote the K&W specialty boxes that fit them. Browse our tongue and specialty box store category, see the K&W truck boxes, or return to the full K&W tool boxes range.
K&W Specialty Boxes FAQs
What are the dimensions of the K&W KWTB3421N tongue box?
It is listed at 16 inches wide at the front, 34 inches wide at the back, 18.25 inches high and 19 inches deep.
Which K&W specialty box fits under a tonneau cover?
The KWUT47-2DT, at 47.5 by 16.5 by 18.5 inches, is designed to fit under tonneau covers. Measure your cover clearance first.
What sizes do K&W specialty tote boxes come in?
K&W tote boxes come in 12 by 12 by 24 inches and 12 by 12 by 36 inches.
What finishes are K&W specialty boxes available in?
The tote boxes are listed in bright aluminum or black. Ask us about finish options for the tongue box and the KWUT47-2DT.
How does the KWUT47-2DT keep tools dry?
It has a durable weather seal, stainless steel latches and automotive grade gas lid lifts.
Need help choosing the right K&W Manufacturing equipment?
Talk to the team or send us your list and we will put a quote together.






