Knaack Job Site Chests
Knaack Monster Box 1010 Chest, With 31 Cubic Feet, a Tubular Steel Frame, Four-Point Crane Lift, Recessed Lock and More
The Model 1010 at 66 by 30 inches, its crane lift frame for hoisting between floors, a UL-rated recessed lock, deep cover lid, Power Pass grommet, skids and caster options.
Moving a loaded gang box between floors of a building under construction calls for a chest made to be rigged and hoisted, and the Knaack Monster Box 1010 is built for that, supplied across New England by Nation Wide Ladder. The Model 1010 we list holds 31 cubic feet in a 66 by 30 inch footprint, with a tubular steel frame and four-point crane lift, an integrated recessed lock, a deep cover lid, a Power Pass grommet and skids ready for casters.

- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Who Needs a Knaack Monster Box Rather Than a Standard Chest
Most job boxes stay on the ground floor or ride a forklift across the yard. On multi-story work, the tools have to follow the crew upward, and a chest lifted by a crane or hoist needs a frame and pick points built for that load. Knaack built the Monster around a tubular steel frame for exactly this, and positions the Model 1010 for the job site, the workshop and the plant floor.
Mechanical and electrical contractors on commercial buildings, steel erectors and maintenance crews in plants are typical users. They need a chest big enough for compressors, power tools and cords, and they need it to land on a deck still locked and in good shape. On a long project the Monster often becomes the fixed tool crib for a floor, moved up as the building rises.
If the box never leaves grade, a JOBMASTER chest may be the simpler choice. Once a crane is part of the plan, the Knaack Monster Box is the model built for it.
Our team will talk through how your chest moves on site and confirm whether the Knaack Monster Box suits that routine before you order.
Knaack Monster Box 1010 Size, Frame and Capacity
The Knaack Model 1010 Monster Box chest is 66 inches wide and 30 inches deep, with 31 cubic feet inside. That is about half again the space of the largest JOBMASTER we list, the Model 60 at 20.25 cubic feet, in a footprint 6 inches wider and 6 inches deeper, so check door openings and elevator sizes before the Monster arrives.
The heavy tubular steel frame carries a four-point crane lift system. Knaack designs it for center-point rigging, which it says hoists more safely than a two-point or bar lift. The deep cover lid adds strength and helps the closed chest shed weather, and Knaack calls the chest weather resistant.
Underneath, four-way skids of 7 gauge steel let a forklift come in from any side, and they are pre-punched for optional casters. A powder coat finish guards against corrosion, and a Power Pass grommet lets a cord run inside so tools can charge while the box stays locked.
We can arrange door to door delivery on our own trucks across New England, so a Knaack Monster Box reaches the site rather than a terminal.
The Knaack Monster Box Lock and Lid Against Theft
A box that holds a crew’s best tools is a target, and the lock is often the first thing attacked. Knaack fits the Monster 1010 with an integrated recessed lock that it describes as the only UL-rated, drill-resistant and weather-resistant lock in the jobsite storage category. Recessing it into the body leaves little for a bar or a drill bit to bite on, and it keeps the Monster lock cylinder out of the rain.
The deep cover design works with the lock. Because the lid comes well down over the body, there is no exposed seam at the top edge for a pry bar to start in, and Knaack describes the result as close to impervious to drilling and prying.
Good habits still matter. Keep the lid shut whenever the chest is unattended, park it where it can be seen, and lock it before every lift so the lid cannot open in the air.
Our Windham NH and Worcester MA showrooms offer free in-person consultations, so you can check the Monster lock and lid design with our team.
Rigging, Moving and Caring for a Knaack Monster Box
Before any crane pick, close and lock the lid, secure loose contents and use rigging rated for the chest and everything in it. Attach to all four lift points so the load hangs level from a single center hook, and keep people clear under the load. Knaack’s lift points are part of the frame, so inspect them for bends or cracks before each pick. On the ground, move it with a forklift by the skids, never by the lid.
Knaack’s heavy-duty caster set, offered with 4 or 6 inch wheels, two fixed and two swivel, all braked, carries a 2,600 pound rating that includes the chest and its contents, so weigh a loaded chest before adding them. Remove casters before a crane lift if your site rules require it, and set the Monster down on firm, level ground.
Wash concrete splash and road salt off the Monster, touch up chips in the powder coat and keep the grommet seated so water stays out.
Send us a quote request for the Model 1010 and casters, or call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts.
Where a Knaack Monster Box Sits in Site Storage
A crane-ready Monster chest often anchors the upper floors while smaller boxes, shelving and carts handle the work at grade. Matching each chest to how material moves on the job keeps each item in the right place.
If you are comparing storage from other makers too, start with our ladder and truck equipment brands hub.
Get Pricing on the Knaack Monster Box
Nation Wide Ladder has served contractors for over 50 years, and we price the Knaack Monster Box with the casters and delivery your site needs. See it beside other Knaack job site chests and the full Knaack storage range, or browse our Knaack store.
Knaack Monster Box FAQs
How big is the Knaack Monster Box 1010?
The Model 1010 is 66 inches wide and 30 inches deep, with 31 cubic feet of storage.
Can a Knaack Monster Box be lifted by crane?
Yes. Its tubular steel frame has a four-point crane lift system that Knaack designs for center-point rigging.
What lock does the Knaack Monster Box use?
A recessed lock built into the body, which Knaack calls UL-rated, with resistance to both drilling and weather.
Does the Knaack Monster Box have a Power Pass grommet?
Yes, a Power Pass electrical pass-thru grommet lets a cord run into the locked box.
Can casters be fitted to a Knaack Monster Box?
The skids are pre-punched for optional casters. Knaack's caster set carries 2,600 pounds, a figure that counts the chest and its contents.
Need help choosing the right Knaack equipment?
Talk to the team or send us your list and we will put a quote together.


