Global Glove range

Global Glove Work Gloves, From Insulated Ice Gripster and Samurai Shells to Thin Polyurethane Coated Knits and More

Four cut resistant Global models compared by shell gauge, liner, coating, ANSI/ISEA 105 cut level, EN 388 code and cold rating, with touch screen tips and ESD and food contact notes.

Global Glove work gloves let a crew handle sharp metal, glass and cold, wet material without trading away grip or dexterity, and Nation Wide Ladder matches the right model to each task before we quote. We list two insulated models for winter, the Ice Gripster 380INT and the Samurai Glove CR318INT, and two thin polyurethane coated knits, the PUG-118 and the PUG-921 made with Tuffalene Platinum.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Two Families of Global Glove Work Gloves for Cold Sites and Close Tasks

The four Global Glove models we list split cleanly by the work they suit. The 380INT and CR318INT are winter models, with a seamless outer shell over a brushed acrylic terry liner, a rubber coated palm for grip, and EN 511 cold ratings. They suit framers, roofers, glaziers and sheet metal crews working outdoors from late fall to spring, when bare hands stiffen and a wet knit soon turns cold.

The Global Glove PUG-118 and PUG-921 are thin, single layer knits with a smooth polyurethane palm, made for close work by feel. An 18 or 21 gauge shell is fine enough to thread a nut, pick up a screw or read a tape, which suits electricians, installers and assembly or warehouse tasks indoors. Both are listed as anti-static for ESD protected areas, and their component materials comply with FDA rules for food contact.

All four Global Glove models share a knit wrist cuff that keeps them from slipping off and a colored overcast stitch on the hem for quick size identification, so mixed sizes in one bin are easy to sort. All four also carry ANSI/ISEA 105-2016 cut ratings, from A3 to A5, which means the choice between them is about climate and dexterity more than basic protection.

Our team helps you select the right products for each trade, so a crew that works both cold roofs and warm interiors can get the right Global Glove work gloves for each.

Global Glove 380INT – Ice Gripster® Double-Coated Cut, Abrasion, and Puncture Resistant Touch Screen Gloves

Insulated Ice Gripster 380INT and Samurai CR318INT Work Gloves

The Global Glove Ice Gripster 380INT is a high-visibility orange model built from a seamless 13 gauge polyester shell and a 7 gauge acrylic terry liner. Its palm is double dipped. A full coat of smooth rubber forms a liquid resistant barrier, and a second foam rubber palm coat adds grip in wet or dry conditions. Global Glove rates it A3 for cut at 1,219 grams, level 3 for abrasion and level 3 for puncture, with an EN 388 code of 2242X, EN 407 heat code X2XXXX and EN 511 cold code X2X.

The Global Glove Samurai CR318INT trades the polyester shell for 13 gauge high-visibility orange Tuffalene UHMWPE, which lifts cut protection to A5 at 2,264 grams. Its 10 gauge brushed acrylic terry liner adds warmth, its shell repels water, and its black foam natural rubber latex palm improves wet grip while staying flexible in low temperatures. Global puts puncture at level 5, or 169 newtons, with EN 388 code 3X43E and EN 511 code X2X. Both have touch screen fingertips.

Our own trucks deliver door to door across New England, so a winter order of insulated pairs can arrive with the rest of the crew’s gear.

Global Glove CR318INT – Samurai Glove® Cut, Abrasion, and Puncture Resistant Touch Screen Gloves

PUG-118 and PUG-921, Thin Global Work Gloves With Polyurethane Palms

The Global Glove PUG-118 uses an 18 gauge high-visibility yellow and green Tuffalene UHMWPE shell with a smooth white polyurethane palm. Global Glove describes the shell as giving near bare hand feel, and the bright color lets a foreman see hands near a blade or press. Global rates it A4 for cut, level 4 for abrasion and level 3 for puncture, with EN 388 code 3X42E.

The Global Glove PUG-921 goes finer, with a 21 gauge salt-and-pepper shell made from Tuffalene Platinum. Global makes that fiber without glass or metal reinforcement and says it runs cooler, lasts longer through abrasion and leaves no fiber particles in the material being handled. A black polyurethane palm bonds to the liner to resist flaking and peeling, a black nitrile patch reinforces the thumb crotch where knits wear first, and touch screen fingertips keep phones usable. Global lists A4 for cut at 1,769 grams, level 5 for abrasion, level 3 for puncture and EN 388 code 3331C.

Both thin Global Glove knits are anti-static and food contact compliant, which suits them to clean assembly and service work as well as general trade work.

Stop by our Windham, NH or Worcester, MA showroom for a free consultation, and compare the feel of a thin knit with an insulated pair before you order.

Global Glove PUG-118 – Samurai Glove® High-Visibility UHMWPE Gloves with Cut, Abrasion, and Puncture Resistance

Global Glove Work Gloves on Ladders and Truck Racks

Many hand injuries happen during setup rather than the task itself, while sliding a ladder off a rack, carrying sheet stock up a stair or climbing with cold hands on aluminum rungs. A coated, cut resistant Global Glove pair gives grip and protection through those moments as well as the job.

For the ladders and truck racks your gloved hands handle every morning, browse each maker we carry in our ladder and truck equipment brands hub.

Global Glove PUG-921 – Samurai Glove® Salt-and-Pepper Cut Resistant Tuffalene® Platinum

How to Read Cut, Puncture and Cold Ratings on Global Glove Work Gloves

ANSI/ISEA 105-2016 grades cut resistance from A1 to A9 using the ASTM F2992-15 method on a TDM-100 machine, with a fresh blade for each cut. The thresholds climb quickly. A3 starts at 1,000 grams, A4 at 1,500 grams and A5 at 2,200 grams, while A6 through A9 run from 3,000 to 6,000 grams. Abrasion and puncture carry their own ANSI levels, which Global prints beside the cut rating.

The EN 388 code on a Global Glove listing is a European string read left to right for abrasion, blade cut, tear and puncture, with a final letter for the ISO cut test. An X means that property was not tested or the method does not apply, and for highly cut resistant knits the letter from the straight blade test is the cut figure to read. EN 511 adds cold codes for the insulated models, and EN 407 adds heat codes where tested. Match the ANSI cut level to the sharpest edge in your work, then use the other numbers to compare models with similar cut levels.

Order by phone at 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts, and we will quote the rating and size mix your crew needs.

Order Global Glove Work Gloves for the Season Ahead

We quote Global Glove work gloves by model, size and quantity, matched to the cut level and climate your crew works in. Browse our gloves store category, or return to the wider Global Glove safety gear range for helmets and knee pads.

Global Glove Work Gloves FAQs

Which Global Glove work gloves are insulated for winter?

The Global Ice Gripster 380INT and Samurai CR318INT both have brushed acrylic terry liners and EN 511 cold ratings.

What is the highest cut level among the Global work gloves we list?

The Global Samurai CR318INT is rated A5 under ANSI/ISEA 105-2016, at 2,264 grams on the ASTM F2992-15 test.

Do Global Glove work gloves work with touch screens?

The 380INT, CR318INT and PUG-921 have touch screen compatible fingertips.

Are any Global work gloves safe for food handling or ESD areas?

The PUG-118 and PUG-921 are anti-static for ESD protected areas, and their component materials comply with FDA rules for food contact.

What does an X mean in the EN 388 code on Global Glove work gloves?

An X means that property was not tested or that the test method does not apply to that pair.

Need help choosing the right Global Glove equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder