Brand spotlight
Acro Roofing Equipment, With Guardrail Systems, Warning Lines, Roof Brackets, Ridge Hooks, Wall Brackets and More
Steel fall prevention and staging hardware made in Milwaukee and powder coated safety yellow, from shingle-interleaving residential guardrails and parapet clamps to 19 inch contractor brackets and chicken ladder hooks.
Every roof edge six feet or more off the ground brings an OSHA fall protection decision, and Nation Wide Ladder helps roofing crews answer it with Acro roofing equipment, specified by our team and delivered across New England. We supply Acro guardrail systems for open edges, flat roofs, parapets and vertical surfaces, warning line sets, wall scaffold brackets, fixed and adjustable roof brackets, a steel ridge hook and the reinforced chicken ladder hook.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
What Acro Roofing Equipment Covers on Steep and Flat Roofs
Acro Building Systems makes steel roofing tools and temporary fall prevention gear in Milwaukee, Wisconsin, all hand welded and finished in safety yellow powder coat. Its equipment sorts into two jobs on a roof. Guardrail and warning line systems keep workers from reaching an open edge, and brackets and hooks give roofers a place to stand, stage material and climb on a pitched surface.
Our Acro roofing equipment pages follow that split. The guardrail systems page walks through the open edge, flat roof, parapet and vertical surface systems along with the X warning line set and the wall scaffold brackets that ride on them. The roof brackets and ridge hooks page covers the 19 inch contractor brackets, the adjustable steel bracket, the steel ridge hook and the reinforced chicken ladder hook. Choose guardrails when the question is the edge, and brackets when it is footing on the slope.
Shop Acro Roofing Equipment by Category
Acro Roofing Equipment History, From Milwaukee Metal Stamping to Roof Safety
Acro Building Systems began as a division of Acro Metal Stamping Company, which was founded in Milwaukee in 1940, and Acro dates the building systems division to 1992. Its equipment is made in an ISO 9001 facility in Milwaukee, hand welded and powder coated safety yellow so it stands out on a roof deck. Acro sells across the United States and Canada through distributors and supports buyers with online instructions and product videos.
The company credits itself with a string of roofing firsts. Its own history page lists the 19 inch contractor roof bracket, a residential guardrail built as a roof bracket with a post, a flat roof guardrail with a plate that can be left behind, a swivel head for ladder ridge hooks, a rake edge bracket that interleaves with shingles and a guardrail for vertical surfaces. Acro also says it impact tests its guardrails on top of the static load test OSHA requires. Those are Acro claims, but they explain why so much of its equipment installs like an ordinary roof bracket.
We have served roofers, builders and homeowners for over 50 years, long enough to have watched fall protection on New England roofs shift from rope and harness alone toward edge systems like these.
Guardrails, Warning Lines, Brackets and Hooks in Our Acro Roofing Equipment Range
Guardrail and perimeter systems. Our Acro guardrail systems include the 12075 open edge system for pitched roofs, the 12060 flat roof system with its leave-behind plate, the 12090 parapet system, the 12045 vertical surface system and the 10140 end guard rail. The Acro 21000 X warning line set and the pre-weighted heavy duty warning line system mark off safe zones on commercial roofs.
Wall scaffold brackets. The Acro 48 inch bracket builds a 48 inch walkway with guard railings on a building up to five stories, joined by a 54 inch 2×8 corner bracket and an over plate hanger for the 12048 wall scaffolding system.
Roof brackets and ridge hooks. On the Acro roof brackets and ridge hooks page you will find the 19 inch contractor brackets set at 45 degrees for 2×6 or 2×8 planks, the 29038 adjustable steel roof bracket, the 11084 steel ridge hook and the 11610 reinforced chicken ladder hook.
Why one maker for both. Buying guardrails and brackets from the same maker keeps the roofing equipment on a truck consistent. The Acro open edge bracket installs with the same nailing pattern and tap-out removal as an Acro roof bracket, the posts interchange across the commercial systems, and everything carries the same yellow finish, so a crew can spot Acro roofing equipment left on a roof or in the yard at the end of the day.
Our team checks roof pitch, edge type and plank sizes with you, so the Acro roofing equipment you order fits the roofs your crew is about to work.
OSHA Fall Rules That Shape Acro Roofing Equipment Choices
OSHA 1926.501 sets the trigger. On residential construction, on steep roofs and on low-slope roofing work, an unprotected side or edge 6 feet or more above a lower level needs fall protection. Residential and steep roof work can use a guardrail system, a safety net or a personal fall arrest system, and on steep roofs a guardrail must carry toeboards. Low-slope roofing also allows a warning line combined with a guardrail, net, fall arrest system or safety monitoring.
OSHA 1926.502 then sets the numbers that guardrail equipment has to meet. The top rail sits 42 inches, plus or minus 3 inches, above the walking surface, and the system must withstand at least 200 pounds without failure. A warning line has to stay between 34 and 39 inches high, flagged with high-visibility material at no more than 6 foot intervals. Acro says its open edge system was lab tested to OSHA’s 2011 rules, including that 200 pound force outward and downward.
Bring your roof plans to our Windham, NH or Worcester, MA showroom for a free consultation, and we will help you match the edges on each job to the Acro roofing equipment that covers them.
How Acro Roofing Equipment Works With Ladders and Harness Systems
Guardrails rarely work alone on a roofing job. Crews still climb an extension ladder to reach the eave, many keep harnesses and anchors for tasks outside the guarded area, and a ridge hook turns a single ladder into a climbing aid on a steep pitch. Acro quotes OSHA’s own view that fall prevention such as guardrails is generally preferable to fall protection such as nets or arrest devices, since it needs no action from the worker.
To compare the ladder and harness makers that pair with Acro on the same roof, open our ladder and truck equipment brands page.
Choosing Acro Roofing Equipment for Residential and Commercial Roofs
Acro’s own guidance splits its guardrails by roof type. On residential and steep slope roofs it uses the 12070 steep pitch and 12075 open edge systems on the roof itself, with the 12045 vertical and 12060 flat roof systems around holes and edges. On commercial and flat roofs it points to the 12045, 12060 and 12090 systems for roofs, holes and edges. Posts go no more than 8 feet apart, with construction grade 2×4 lumber as rails.
Brackets follow plank size and pitch. A fixed 19 inch contractor bracket at 45 degrees gives more clearance between the plank and the shingle it is nailed through, while the adjustable bracket sets at 33, 45, 60 or 90 degrees for crews that see many pitches. For climbing, Acro suggests the 11084 ladder hook for homeowners and its chicken ladder system for professionals who want more versatility.
Think about storage and reuse as well. Acro roofing equipment is steel and reusable, so a roofing contractor who buys a full set of edge posts and brackets once can move it from job to job for years, while warning line sets fold down for the next flat roof. Homeowners usually need far less, often a ridge hook and a few brackets.
Our trucks make regular weekly deliveries from New Hampshire to Maine, so crews there can restock Acro roofing equipment between jobs without waiting on freight.
Get Acro Roofing Equipment Quoted for Your Next Roof
When you need edge protection and footing that install as fast as a roof bracket, we quote Acro roofing equipment to order and deliver it on our own trucks. Browse the full Acro store range, or send your list through our Request a Quote form.
Acro Roofing Equipment FAQs
Where is Acro roofing equipment made?
Acro Building Systems says its products are manufactured in its ISO 9001 facility in Milwaukee, Wisconsin, hand welded and powder coated safety yellow.
When does OSHA require fall protection on a roof?
OSHA 1926.501 requires it on residential, steep roof and low-slope roofing work where an unprotected edge is 6 feet or more above a lower level.
Do I need a harness if I use Acro guardrails?
Acro's FAQ says no, because a guardrail system, a safety net or a personal fall arrest system each satisfies the OSHA requirement on its own.
How far apart do Acro guardrail posts go?
Acro lists a maximum spacing of 8 feet between posts when used with construction grade lumber.
Which Acro roofing equipment suits a homeowner?
Acro recommends its 11084 ladder hook for homeowners who need a safer way to climb on a roof, with one hook needed per ladder.
How do I get a price on Acro roofing equipment?
We quote every order. Use the Request a Quote form or call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts.
Need help choosing the right Acro equipment?
Talk to the team or send us your list and we will put a quote together.









